IPC PSU
FSP500-702UC
DESCRIPTION
FSP500-702UC is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 500 Watts, and uses unique active PFC
(Power Factor Correction) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
SAFETY STANDARD APPAOVAL
APPLICATION
For standard, advanced server and storage power system.
OUTPUT SPECIFICATION
Hold up Time:
115V/60Hz 16mSec.
Minimum@100% Load,
230V/50Hz 16mSec.
Minimum,@100% Load
+3.3Vdc output : +3.5 Vdc
minimum, + 4.5Vdc
maximum
+5Vdc output : +5.5 Vdc
minimum, + 6.82Vdc
maximum
FEATURES
80 Plus
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
Ouput Voltage
Regulation:
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
+12Vdc output : +13.4 Vdc
minimum, + 15.6Vdc
maximum
Line input fuse protection
Output Rise Time:
Ripple & Noise:
115V-rms/230V-rms 5V
20ms Maximum
WATTAGE
Wattage:
500W
115V-rms/230V-rms 12V
20ms Maximum
DIMENSION
Dimension:
3.3V:50mV p-p
240mm(L) x 100mm(W) x
70mm(H)
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
PRODUCT HIGHLIGHT
Efficiency Level:
Altitude:
12V3:120mV p-p
80 Plus
2000M
-12V:120mV p-p
5Vsb:50mV p-p
INPUT SPECIFICATION
ENVIRONMENTAL SPECIFICATION
Input Range:
90-264 Vac
TEMP.Range:
Storage Temperature: -
Input Frequency: 47-63 Hz
Input Current: 115V@ 10.0 Amps-rms maximum
230V@ 5.0 Amps-rms maximum
20°C to + 80℃
MTBF:
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃, 75%
output load, and nominal AC
inout voltage
GENERAL SPECIFICATION
Effciency:
Voltage
80% 230VAC
+3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%
Regulation:
*Output Voltage and Current Rating
+3.3V
+5V
50mV
±5%
20A
+12V1
120mV
±5%
15A
+12V2
120mV
±5%
15A
+12V3
120mV
±5%
15A
-12V
120mV
±10%
0.5A
+5Vsb
50mV
±5%
2.5A
0A
Ripple-Noise(R-P) mV
Regulation Load %
Output Max.(A)
50mV
±5%
24A
Output Min.(A)
0.5A
0.5A
1A
1A
1A
0A
NOTES
5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
The +3.3V and +5V total output shall not exceed 150 watts.
Maxmum continuous load combined 12V shall not exceed 35A
The total output shall not exceed 500 watts
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for more detail.
FSP reserve the right to change the content without prior notice