Datasheet > FSP3301

FSP3301

更新时间： 2024-09-27 07:00:19

品牌	Logo	应用领域
FOSLINK		驱动器
页数	文件大小	规格书
9页	259K
描述
FIXED FREQUENCY WHITE LED DRIVER

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

FSP3301 数据手册

FIXED FREQUENCY WHITE LED DRIVER

FSP3301

GENERAL DESCRIPTION

FEATURES

On Board Power Transistor

Drives up to 6 Series White LEDs

Up to 87% Efficiency

The FSP3301 is a step-up converter designed for

driving up to 6 series white LEDs from a single cell

Lithium Ion battery. The FSP3301 uses current mode,

fixed frequency architecture to regulate the LED

current, which is measured through an external

current sense resistor. Its low 104mV feedback

voltage reduces power loss and improves efficiency.

The OV pin monitors the output voltage and hold the

output voltage equal Vov if an over-voltage condition

is present due to an open circuit condition.

Over 1 MHz Fixed Switching Frequency

Open Load protection

Low 104mV Feedback Voltage

PWM Dimming

UVLO

Internal Current Limit

Available in TSOT23-6L and QFN8L Packages

The FSP3301 includes under-voltage lockout, current

limiting and thermal overload protection preventing

damage in the event of an output overload.

APPLICATIONS

Cell Phones

The FSP3301 is available in small 6-pin TSOT23 or

8-pin QFN (2mm x 2mm) packages.

Handheld Computers and PDAs

Digital Still Cameras

Small LCD Displays

PIN CONFIGURATION

(1) TSOT23-6L

(2) QFN8L

(Top View)

Symbol

Name

Descriptions

TSOT23-6L

QFN8L

Power Switch Output. SW is the drain of the internal MOSFET switch. Connect

the power inductor and output rectifier to SW. SW can swing between GND and

29V.

1，5

GND

Ground.

Feedback Input. The FSP3301 regulates the voltage across the current sense

resistor between FB and GND. Connect a current sense resistor from the

bottom of the LED string to GND. Connect the bottom of the LED string to FB.

The regulation voltage is 104mV.

Regulator On/Off Control Input. A high input at EN turns on the converter, and a

low input turns it off. When not used, connect EN to the input source for

automatic startup. The EN pin cannot be left floating.

Over Voltage Input. OV measures the output voltage for open circuit protection.

Connect OV to the output at the top of the LED string.

Input Supply Pin. Must be locally bypassed.

2007-4-16

1/9

12 3 4 5 6 7...9

中文翻译

下载PDF

与FSP3301相关器件

型号	品牌	获取价格	描述	数据表
FSP3301QAD	FOSLINK	获取价格	FIXED FREQUENCY WHITE LED DRIVER
FSP3301TCAD	FOSLINK	获取价格	FIXED FREQUENCY WHITE LED DRIVER
FSP3302	FOSLINK	获取价格	4 & 6 CHANNEL CHARGE PUMPS FOR WHITE LED BIAS
FSP3302QAD	FOSLINK	获取价格	4 & 6 CHANNEL CHARGE PUMPS FOR WHITE LED BIAS
FSP3303	FOSLINK	获取价格	4 & 6 CHANNEL CHARGE PUMPS FOR WHITE LED BIAS
FSP33035	FOSLINK	获取价格	BRUSHLESS DC MOTOR CONTROLLER
FSP33035ND	FOSLINK	获取价格	BRUSHLESS DC MOTOR CONTROLLER
FSP33035SD	FOSLINK	获取价格	BRUSHLESS DC MOTOR CONTROLLER
FSP3303QAD	FOSLINK	获取价格	4 & 6 CHANNEL CHARGE PUMPS FOR WHITE LED BIAS
FSP3304	FOSLINK	获取价格	WHITE LED/OLED STEP-UP CONVERTER