IEC Inlet Filters FN 9222 E
DATASHEET
General Performance EMC/EMI Filter with Earth Line Choke
Rated currents up to 15 A
Approvals & Compliances
Excellent performance/size ratio
Integrated earth line choke
Complies with IEC/EN 60601-1
Snap-in versions (S and S1 type)
Optional wide mounting flanges
(CQC except HI-types)
The FN 9222 E IEC inlet filter combines an IEC inlet
and mains filter with excellent filter attenuation in a
small form factor and integrated earth line choke.
Choosing the FN 9222 E product line brings you the
rapid availability of a standard filter associated with
the necessary safety acceptances. Standard IEC
connector filters are a practical solution helping you
to pass EMI system approval in a short time. A wide
selection on amperage ratings, output connections,
mounting possibilities and filters for medical
applications are designed to offer you the desired
solution.
Performance indicators
15
Features and benefits
Exceptional conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
Technical specifications
250 VAC, 50/60 Hz
Maximum continuous operating voltage
Operating frequency
Rear/front or snap-in mounting
DC to 400 Hz
dc to 400 Hz
FN 9222 B versions comply with the requirements of
1MOP acc. to IEC/EN 60601-1 for creepage and
clearance, leakage current and high potential
testing
1 to 15 A @ 50°C max.
Rated currents
1 to 10 A (ENEC, CQC)
1 to 15 A (UL, CSA)
Approvals by rated current
Wide mounting flanges available
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 1000 VAC for 2 sec
High potential test voltage
Different output connections offering maximum
flexibility for assembly
IP 40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
Protection category
Without earth line choke see FN 9222 data sheet
Custom-specific versions are available on request
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230 V (Mil-HB-217F)
Typical electrical schematic
1,610,000 hours
Portable electrical and electronic equipment
Small to medium-sized machines and household
equipment
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
Medical equipment
Rack mounting equipment
Typical electrical schematic