IEC Inlet Filters FN 380
DATASHEET
Versatile Filtered Power Entry Module
Rated currents up to 6 A
Approvals & Compliances
Single or dual-fuse holder
Fuses Ø6.3 x 32 mm Ø5 x 20 mm
2-pole rocker switch
General purpose application
Optional medical versions (B type)
The FN 380 power entry module combines an IEC
inlet, a mains filter with a single or dual fuse holder
and a 2-pole rocker switch. Choosing FN 380 product
line brings you the rapid availability of a standard
filter associated with the necessary safety
Performance indicators
acceptances. Standard IEC connector filters are a
practical solution helping you to pass EMI system
approval in a short time. A wide selection on
amperage ratings, fuse options, mounting
possibilities and filters for medical applications are
designed to offer you the desired solution.
Features and benefits
Good conducted attenuation performance, based
on chokes with high saturation resistance and
excellent thermal behavior
Technical specifications
Front or snap-in mounting
Single or dual-fuse holder
250 VAC, 50/60 Hz
Maximum continuous operating voltage
Operating frequency
USA Ø6.3 x 32 mm or EU Ø5 x 20 mm fuses
2-pole rocker switch
DC to 400 Hz
50 to 400 Hz
2 to 6 A @ 40°C max.
Rated currents
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
High potential test voltage
Typical applications
Portable electrical and electronic equipment
Consumer goods
IP 40 according to IEC 60529
-25°C to +85°C (25/85/21)
UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
UL 94 V-2 or better
Protection category
Temperature range (operation and storage)
Design corresponding to
Flammability corresponding to
MTBF @ 40°C/230 V (Mil-HB-217F)
Function
EDP and office equipment
Single-phase power supplies, switch-mode power
supplies
550,000 hours
Test and measurement equipment
Medical equipment
2-pole, dark not illuminated
Marking I - 0
Inrush current 51 A
Electrical specifications
10,000 on-off operations according to ENEC
6,000 on-off operations according to UL 1054, TV 5
Typical electrical schematic (single fuse)
50,000 cycles
Mechanical life
Switch ratings
Europe (ENEC)
USA (UL)
N'
J
J'
6 A (4 A), 250 VAC*
external connection required
6 A, 125 VAC; 4 A, 250 VAC; 1/10 HP
6 A, 125 VAC; 4 A, 250 VAC; 1/10 HP
Canada (CSA)
* Value in () relates to the inductive current charge: cos φ=0.65
P' G
G'
I
I'
Typical electrical schematic (dual fuse)
N' H
J
H'
J'
external connection required
P' G
G'
I
I'