FEATURES
• 30 WATTS OUTPUT POWER
• OUTPUT CURRENT UP TO 8.5A
• STANDARD 2.00 X 1.00 X 0.40 INCH
• HIGH EFFICIENCY UP TO 91%
• 2:1 WIDE INPUT VOLTAGE RANGE
• SIX-SIDED CONTINUOUS SHIELD
• FIXED SWITCHING FREQUENCY
• CE MARK MEETS 2006/95/EC, 93/68/EEC AND 89/336 EEC
• DESIGN MEETS UL60950-1, EN60950-1 AND IEC60950-1
• ISO9001 CERTIFIED MANUFACTURING FACILITIES
• COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC
OPTIONS
APPLICATIONS
Negative logic Remote On/Off
Wireless Network
DESCRIPTION
Telecom/Datacom
Industry Control System
Measurement
The FED30 series offer 30 watts of output power from a 2 x 1 x 0.4 inch
package. FED30 series have 2:1 wide input voltage of 9-18 and 18-36 and
36-75VDC. The FED30 series have features 1600VDC of isolation, short circuit
protection, over-current protection, over-voltage protection, over-temperature
protection and six sided shielding.
Semiconductor Equipment
T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted
INPUT SPECIFICATIONS
OUTPUT SPECIFICATIONS
12V nominal input
24V nominal input
48V nominal input
9 – 18VDC
18 – 36VDC
36 – 75VDC
Output power
30 Watts max.
±1%
Input voltage range
Input filter
Voltage accuracy
Voltage adjustability
Minimum load
Full load and nominal Vin
Single output
± 10%
Pi type
0%
12V input
24V input
48V input
25VDC
50VDC
100VDC
20mAp-p
30mS, typ.
Input surge voltage
100mS max
Line regulation
LL to HL at Full Load
No load to Full load
± 0.2%
± 0.5%
± 1%
Single
Dual
Load regulation
Input reflected ripple current
Nominal Vin and full load
Power up
Nominal Vin and
constant resistive load
Cross regulation (Dual) Asymmetrical load 25% / 100% FL
± 5%
Start up time
Remote ON/OFF 30mS, typ.
1.5-5.1Vo 100mVp-p
12-15Vo 150mVp-p
20MHz bandwidth
(Measured with a 1uF/50V MLCC)
12V input
24V input
48V input
12V input
24V input
48V input
9VDC
18VDC
36VDC
8VDC
16VDC
32VDC
Ripple and noise
Start-up voltage
±0.02% / ºC, max.
Temperature coefficient
Transient response recovery time
25% load step change 250μS
Shutdown voltage
1.5V
2.5V
3.3V
Output
Output
Output
Output
Output
Output
2.0V
3.3V
3.9V
6.2V
15V
Remote ON/OFF (Note 6)
(Positive logic)(Standard) DC-DC ON
DC-DC OFF
Open or 3V < Vr < 12V
Short or 0V < Vr < 1.2V
Short or 0V < Vr < 1.2V
Open or 3V < Vr < 12V
Over voltage protection
Zener diode clamp
5.0V & 5.1V & ±5V
12V & ±12V
15V & ±15V
(Negative logic)(Option)
DC-DC ON
DC-DC OFF
18V
Input current of Remote control pin
Nominal Vin
-0.5mA ~ +0.5mA
Over load protection
% of FL at nominal input
150%, typ.
Remote off state input current
Nominal Vin
3mA
Short circuit protection
Hiccup, automatics recovery
ENVIRONMENTAL SPECIFICATIONS
GENERAL SPECIFICATIONS
-40ºC to +50ºC (without derating)
+50ºC to +85ºC (with derating)
105ºC
Efficiency
See table
1600VDC, min.
1600VDC, min.
Operating ambient temperature
Input to Output
Input (Output) to Case
Isolation voltage
Maximum case temperature
Storage temperature range
Over temperature protection
Thermal impedance
(Note 7)
Thermal shock
Case grounding
Connect case to -Vin with decoupling Y Cap
109ohms, min.
-55ºC to +125ºC
Isolation resistance
Isolation capacitance
Switching frequency
Design meets safety standard
Case material
115ºC, typ.
1500pF, max.
Nature convection
Nature convection with heat-sink
12ºC/Watt
10ºC/Watt
430KHz, typ.
MIL-STD-810F
MIL-STD-810F
5% to 95% RH
IEC60950-1, UL60950-1, EN60950-1
Nickel-coated copper
FR4 PCB
Vibration
Relative humidity
Base material
Potting material
Epoxy (UL94-V0)
2.00 X 1.00 X 0.40 Inch
(50.8X 25.4 X 10.2 mm)
EMC CHARACTERISTICS
EMI (Note 8)
EN55022
Class A
Dimensions
Weight
Air ± 8KV
Contact ± 6KV
ESD
EN61000-4-2
EN61000-4-3
Perf. Criteria A
30.5g(1.07oz)
3.173 x 106 hrs.
BELLCORE-TR-NWT-000332
MIL-HDBK-217F
Radiated immunity
10 V/m Perf. Criteria A
± 2KV Perf. Criteria A
± 1KV Perf. Criteria A
10 Vr.m.s Perf. Criteria A
MTBF (Note 1)
5.548 x 105 hrs.
Fast transient (Note 9) EN61000-4-4
Surge (Note 9)
EN61000-4-5
EN61000-4-6
Conducted immunity
VER:00 Page 1 of 3 Issued Date:2008/07/11