FAN7093_F085
High Current PN Half Bridge
December 2011
1
Features
• Path resistance of max. 30.5 mꢀ at 150 °C
• Low quiescent current of max. 270 ꢁA
• PWM capability of up to 60 kHz combined with active
freewheeling
• Switched mode current limitation for reduced power
dissipation in over current
• Current limitation level of typical 46 A
• Status flag diagnosis with low and high side current sense
capability
• Over temperature shut down with latch behavior
• Shorted load protection with latch behavior
• Over voltage lock out
TO263-7L
• Under voltage shut down
• Driver circuit with logic level inputs
• Typical slew rate of 1 V/µs with open SR pin
• Adjustable slew rates for optimized EMI
2
Brief functional Description
The FAN7093_F085 is an integrated high current half bridge for
electric motor drive applications. It contains one P-channel high-
side MOSFET and one N-channel low-side MOSFET with an
integrated control IC in one package. With the P-channel high-
side switch the need for a charge pump is eliminated and
therefore minimizing EMI. Pins IN and ꢀꢁꢂ are logic level inputs
and control the half bridge outputs. The diagnostic current output
pin IS outputs a proportional current through the half bridge
MOSFETS. The IS pin output represents current for either the P-
Chan or the N-Chan depending on which is active. The part is
protected against short to Battery or ground, over current, over-
temperature, over voltage and under voltage. The
FAN7093_F085 provides a cost optimized solution for protected
high current PWM motor drives with very low board space
consumption.
FAN7093_F085 Rev. C1
2
www.fairchildsemi.com