April 2014
FAN7093
High-Current PN Half-Bridge Driver
Description
Features
The FAN7093 is an integrated high-current half-bridge
driver for electric motor drive applications. It contains
one P-channel high-side MOSFET and one N-channel
low-side MOSFET with an integrated control IC in one
package. With the P-channel high-side switch, the need
for a charge pump is eliminated, which minimizes EMI.
.
.
.
Path Resistance for a Full-Bridge Configuration:
Max. 30.5 mΩ at 150°C
PWM Capability: > 60 kHz1 Combined with Active
Free Wheeling
Switched-Mode Current Limitation for Reduced
Power Dissipation In Over-Current Condition
Pins IN and /INH are logic-level inputs and control the
half-bridge output. The diagnostic and current sense IS
pin outputs a current that is proportional to the current
flowing through the half-bridge MOSFETs. The IS pin
output represents current for the P-channel or the N-
channel, depending on which is active.
.
.
Current Limit Protection: Typ. 43 A
Independent Current-Sense Output and Diagnostic
Flag for High and Low Sides
.
.
.
.
.
.
.
Over-Temperature Protection (OTP) with Latch
Shorted-Load Protection with Latch Behavior
Over-Voltage Protection (OVP) with Lockout
Under-Voltage Protection (UVP)
The part is protected against a short to battery or
ground of the out pin, over-current, over-temperature,
over-voltage, and under-voltage conditions. The
FAN7093 provides a cost- and space-optimized solution
for protected high-current PWM motor drives.
Logic Level Control Inputs
Adjustable Slew Rates for Optimized EMI
Typical Slew Rate of 1 V/µs with
Open Slew Rate Pin
Figure 1.
TO263-7L
1 The minimum duty cycle is 34% when VBATT=14 V, RSR is
shorted, and the following parameters are at their typical
values: td(ON)HS, td(ON)LS, tSlew(on)HS, and tSlew(on)LS.
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN7093 • Rev. 1.0.6