Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. TJ = -40°C to +150°C; all voltages with respect to ground, and
positive current flowing into pin (unless otherwise specified).
Symbol
Parameter
Supply Voltage(4)
Condition
Min.
-0.3
-0.3
-0.3
-0.3
Typ. Max.
Unit
V
VBATT
45
45
VIN /VINH Logic Input Voltage(4)
V
VSR
VIS
Voltage at SR Pin(4)
Voltage at IS Pin(4)
1.5
7.5
V
V
ID(HS)
ID(LS)
,
HS/LS Continuous Drain Current(4,5)
HS/LS Pulsed Drain Current(4,5)
HS/LS PWM Current(4,5)
TC < 85°C
-46/46
-90/90
-55/55
A
A
A
ID(HS),
ID(LS)
TC < 85°C Single Pulse <
5 µs
ID(HS),
ID(LS)
TC < 125°C f=1 kHz,
DC=50%
Temperatures
TJ
Junction Temperature(4)
Storage Temperature(4)
-40
-55
150
150
°C
°C
TSTG
Electrostatic Discharge Capability (ESD)
IN, /INH, SR, IS
-2
-6
2
6
ESD
Human Body Model, JESD22-A114(6)
kV
OUT, GND, VBATT
Notes:
4. Not subject to production testing, specified by design.
5. Maximum reachable current may be smaller, depending on current-limit level.
6. ESD susceptibility, HBM according to AEC_Q100-0042 / JESD22-A114-B (1.5 kΩ, 100 pF).
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Condition
Min. Typ. Max. Unit
VBATT(NOM) Supply Voltage Range for Nominal Operation
7
18
V
Parameter
Deviations Possible
VBATT(EXT) Supply Voltage Range for Extended Operation
5.5
-40
28.0
150
V
TJ
Junction Temperature
°C
Thermal Resistance, Junction-Case, Low-Side
ϴJC(LS)
0.8
°C/W
Switch ϴJC(LS)=∆TJ (LS) / PV (LS)(7)
Thermal Resistance, Junction-Case, High-Side
ϴJC(HS)
0.45
°C/W
°C/W
Switch ϴJC(HS)=∆TJ (HS) / PV (HS)(7)
Using Pad Area of
One Square Inch of
Two-Ounce Copper
ϴJA
Note:
Thermal Resistance, Junction-Ambient(7)
40
7. Not subject to production test; specified by design.
© 2010 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FAN7093 • Rev. 1.0.6
4