ITALIANA
RELE
SERIES F
Low Profile PCB Relays
Different contact ratings up to 16A are
available and a complete range of AC and
DC coil voltages. Terminals are for printed
circuit board mounting, either directly or by
appropriate sockets, for any application
All-or-Nothing relays ideally suited for all
electronic appliances demanding compact
design and reduced power consumption.
Design includes a protective dust cover
sealed to IP67 and provided with a special
device to avoid ozone formation.
requiring
“plug-in”
serviceability
or
maintenance.
SPECIFICATION
Min. insulation resistance
Pollution class / voltage
Environmental protection
Enclosure classification
Type of duty
DIELECTRIC STRENGTH
100 ΜΩ @ 500 VDC (1 minute)
3 / 250 VAC (EN 61810-1)
RT III (EN 61810-1)
IP67 sealed (EN 60529)
Continuous
Coil / contacts :
5000 V RMS
2500 V RMS
Between adjacent contacts :
Between open contacts :
Ground / live parts :
1000 V RMS
(insulated ground)
10x106 operations (AC / DC)
18000 (AC / DC)
Mechanical life expectancy
Max ops./hour @ no load
Max ops./hour @ rated load
Temperature range
Storage temperature
Vibration
Overvoltage class
Impulse voltage class
Weight
360 (AC / DC)
-40 to +85° C
-40 to +85° C
10 g (10-55 Hz)
III (EN 61810-1)
6 kV (coil / contacts)
15 grams
OPERATING TIMES (At Rated Voltage)
Operate (excluding bounces) : max 12
Milliseconds
Milliseconds
Milliseconds
Release (excluding bounces) : max
8
5
Bounces :
max
Insulation type (EN 61810-1)
reinforced (8mm) between coil & contacts
AVAILABLE TYPES
F31 - 3.5 mm pin-spacing 12A-250V AC
F51 - 5 mm pin-spacing 12A-250V AC
1 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
F52 - 5 mm pin-spacing 8A-250V AC
2 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
F61 - 5 mm pin-spacing 16A-250V AC
1 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
APPROVALS
I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy
Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: rele@rele.it - www.rele.it