Compact, 10 Watt, High Voltage Modules
0 to + or - 100 through 0 to + or - 12,000 VDC @ 10 Watts
F Series
The F Series is a broad line of versatile,
robust, DC to HV DC converters providing
100 VDC to 12,000 VDC (positive or
negative polarity) at 10 Watts continuous
output power.*1 The output is proportional
to the input voltage and features a low 0.7
typical turn-on voltage. Nineteen models
are available covering the range of 0 to 100
through 0 to 12,000 volts, positive or
negative. These modules exhibit very low
EMI/RFI, noise and ripple by means of a
quasi-sinewave oscillator, a fully enclosed
transformer, input and output filtering, and
a five sided metal enclosure. The isolated
output allows for user selectable output
polarity. Options include two mounting
holes and an output center-tap option
which, when grounded, provides both
positive and negative outputs from one
compact, low cost module. Contact our
Applications Department for immediate
technical assistance.
FEATURES
Metal Case and Shielded Transformer result in:
Low EMI/RFI
INPUT
MODEL
OUTPUT*2
VOLTAGE
OUTPUT*4
RIPPLE
P-P
Low Ripple
VOLTAGE
CURRENT
Short Circuit Protection
Compact Package
100 mA
50 mA
33.3 mA
25 mA
20 mA
16 mA
12.5 mA
10 mA
8.3 mA
6.6 mA
5 mA
<1.0%
<1.0%
<1.0%
<1.0%
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
<0.1%
<1.0%
<1.0%
<1.0%
<1.0%
<1.0%
<2.5%
<2.5%
<2.5%
<2.5%
F01
F02
F03
F04
F05
F06
F08
F10
F12
F15
F20
F30
F40
F50
F60
F70
F80
F101
F121
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 12V
0 to 15V
0 to 15V
0 to 15V
0 to 15V
0 to 15V
0 to 15V
0 to 15V
0 to 15V
0 to +/-100V
0 to +/-200V
PCB Mountable
Input/Output Isolation
Input/Output Filtering
Proven Reliability
0 to +/-300V
No external components required
MTBF:>810k hours per Bellcore TR-332
0 to +/-400V
0 to +/-500V
OPTIONS
0 to +/-600V
Mounting Holes, F01 – F60 add H to model number (e.g. F10H)
RoHS(- ‘R’ suffix denotes the product is designed to meet RoHS requirements ( e.g. F10R)
Output Center Tap, See CT Series
0 to +/-800V
0 to +/-1,000V
0 to +/-1,200V
0 to +/-1,500V
0 to +/-2,000V
0 to +/-3,000V
0 to +/-4,000V
0 to +/-5,000V
0 to +/-6,000V
0 to +/-7,000V
0 to +/-8000V
0 to +/-10,000V
0 to +/-12,000V
Epoxy: Low Outgassing (NASA approved per ASTM E-959-93)
UL 94 V0 flammability rating
Extended Operating & Storage Temperature:Contact Factory
APPLICATIONS
Capacitor Charging
Spectrometry
3.3 mA
2.5 mA
2 mA
Piezo Devices
Lamp Ignition
Lamp Drive
1.66 mA
1.5 mA
1.25 mA
1 mA
Q Switches
Ion Pumps
Electrostatic Field Generation
Grid Bias
Electrophoresis
Lasers
.834 mA
Electrostatic Chucks
*Note 1. At Maximum Rated Output Voltage.
2. Output Voltage is load dependent. Under light or no load conditions, reduce input voltage so maximum
rated output voltage is not exceeded.
PHYSICAL CHARACTERISTICS
3. Specifications after 30 minute warm-up, full load, at 25oC unless otherwise noted.
4. The rated output current is available at full output voltage and must be derated proport ionally as the input
voltage decreases. For example: a 500V, 1.5W unit, rated at 3mA at 500V will provide 1.5mA at 250V out.
F01-F60: 2.8 x 1.7 x 0.85 (71 x 43 x 21) see Dwg on Sheet 2
F70-F121: 2.8 x 1.7 x 0.95 (71 x 43 x 24) see Dwg on Sheet 2
WEIGHT: <5 Ounces (142 grams)
“
PACKAGING: Epoxy Encapsulated
CASE MATERIAL: Black Anodized Aluminum
“HOT SPOT” CASE
TEMPERATURE POINT
ELECTRICAL SPECIFICATIONS*3
SEE SHEET 2
FOR
INPUT VOLTAGE: See Table
INPUT CURRENT*1: (NO LOAD) < 500mA
(FULL LOAD) <1.5A
MECHANICAL
DETAILS
2.80 (71.12)
1.70 (43.18)
TYPICAL TURN-ON VOLTAGE: 0.7 Volts
ISOLATION: 3,500 Volts + Vout
F70 – F121: 500V + Vout
Dimensions are in inches
EFFICIENCY: >70% Typical
Dimensional Tolerances: ± .03 (.76mm)
OPERATING TEMP: -10° to +50°C
STORAGE TEMP: -25 to +90°C
(Metric equivalents in parenthesis)
4722AM
MAXIMUM CASE TEMP:+85°C (measured at point indicated)
F70 – F121: +70°C (measured at point indicated)
We reserve the right to make changes without notification
e-mail sales@emcohighvoltage.com
Web site www.emcohighvoltage.com
Phone (209) 267-1630 Fax (209) 267-0282
70 Forest Products Road, Sutter Creek CA 95685