ENH050Q1-320/450/600
White Electronic Designs
Display Systems Division
ENH050Q1-320/450/600 Color TFT-LCD Module Features
ꢀ
Slim, lightweight and compact
1. Active area/Outline area=70%
2. Thickness: 16.5mm
GENERAL DESCRIPTION
Panelview provides optically enhanced solutions to the
standard Sharp LQ5AW136 color active matrix LCD
module. The first enhancement is an index matching
(IM) film lamination to the front surface of the display
polarizer.
3. Mass: 185g (Max)
ꢀ
ꢀ
Built-in video interface circuit and control circuit
responsive to two sets of standard RGB analog
video signals.
The IM film is available in two surface treatments - IM/Clear
and IM/110 (a 10% diffusion).The second enhancement is
the incorporation of a reflective polarizer (RP) to improve
brightness by up to 40%. The third enhancement is
the addition of prism films (RPp) further increasing the
brightness of the display. The module accepts full color
video signals conforming to the NTSC(M) and PAL(G-B)
system standards.
Reduced refleciton as a resuld of low reflectance
Black-Matrix and Index Matching (IM) film
lamination. IM is available in two surface
treatments, IM/Clear (glossy) and IM/110 (10%
diffusion).
ꢀ
It is possible to use both the simultaneous and the
independent time sampling.
It can withstand an intense environment, the online
dimension is suitable for an automotive display, compact
size, compatible with 2DIN size.
ꢀ
ꢀ
An external clock mode is available.
Optical viewing angle: wide view angle (6 o'clock
direction.) (Customer can use this module as a 12
o'clock viewing direction type by using a display
rotating function to rotate right/left and up/down
scanning direction electrically.)
Panelview assumes no responsibility for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions specified
in these specification sheets. Panelview does assume the
responsibility for the warranty of the enhanced product.
ꢀ
ꢀ
This module includes a high luminance edge light
that is excellent at low temperature.
FEATURES
It is possible to use the dimming frequency (PWM)
for backlight.
ꢀ
ꢀ
ꢀ
ꢀ
Dual mode type. [NTSC(M) and PAL(B-G)
standards]
MBK-PAL enables the 234-scanning lines panel to
display a picture with virtually 273-scanning lines.
CONSTRUCTION AND OUTLINE
ꢀ
Outline dimensions of TFT-LCD module: See Fig. 3
TFT-active matrix-LCD drive system with high
contrast.
ꢀ
The module consists of a TFT-LCD panel, driver
IC's control PWB mounted with electronic circuits,
edge light, frame, front and rear shielding cases.
(Backlight driving DC/AC inverter is not built in the
module.)
74,800 pixels (RBG Stripe configurations and full
color) 5" diagonal size.
MECHANICAL SPECIFICATIONS
Parameter
Display Format
Specifications
74,800
960 (W) x RGB x 234 (H)
102.2 (W) x 74.8 (H)
13 (5")
0.1065 (W) x 0.3195 (H)
RGB Stripe configuration
126.8 (W) x 89.6 (H) x 16.5 (D)
185 (Max)
Units
pixels
dots
mm
cm
mm
-
mm
g
Active Area
Screen Size (Diagonal)
Dot Pitch
Dot Configuration
Outline Dimension (1)
Mass
Note: This measurement is typical, and see Fig. 3 for details.
White Electronic Designs Corp. reserves the right to change products or specifications without notice.
Original specifications created by Sharp.
Display Systems Division • Hillsboro, OR • (503) 690-2460 • www.wedc.com
August 2003
Rev. 0
1