Proximity Sensors Inductive
Stainless Steel Housing
Type EI, M30, High Noise Immunity
• Stainless steel housing, cylindrical
• Diameter: M30
• Sensing distance: 9 mm
• Hysteresis: 25 - 45%
• Power supply: 24 VDC
• Output: Transistor PNP, make switching
• Protection: Short-circuit and reverse polarity
• LED-indication for output ON
• 2 m PUR cable, shield connected internaly to housing
• Internal 4,7 kΩ, 0,5 W pull down resistor
Product Description
Ordering Key
EI 3010 PPOSS 1556
Proximity switch in stainless netic disturbances. Decreased Type: Inductive proximity
steel housing M30. Made sensitivity to unwanted axle
switch
after Euronorm EN 50 008.
displacements.
Housing diameter (mm)
Rated operating dist. (mm)
Output type
High immunity to electromag-
Housing material
Body style
Special type number
Type Selection
Housing
diameter
Body style
Connection
Rated operating
distance (Sn)
Ordering no.
Transistor PNP, make switching
M 30
Short
Cable
9 mm 1)
EI 3010 PPOSS 1556
1) For flush mounting in metal
Make switching = Normally Open (NO)
Specifications
Rated operational volt. (Ue)
20 to 30 VDC
18 to 33 VDC
(ripple included)
Repeat accuracy (R)
Hysteresis (H)
(Differential travel)
≤ 5%
(UB)
25 to 45% of sensing distance
Ripple
≤ 10%
Effective operating dist. (Sr)
Usable operating dist. (S)
Ambient temperature
Operating
0.9 x Sn ≤ Sr ≤ 1.1 x Sn
0.9 x Sr ≤ Su ≤ 1.1 x Sr
Rated operational current (Ie)
Continuous
≤ 200 mA
No-load supply current (Io)
Output ON: < 6.5 mA
Output OFF: < 2.7 mA
-25° to +70°C (-13° to +158°F)
-30° to +80°C (-22° to +176°F)
Storage
Voltage drop (Ud)
Protection
≤ 2 VDC at max. load
Degree of protection
Housing material
Body
Front
Back
IP 67 (Nema 1, 3, 4, 6, 13)
Reverse polarity,
short-circuit, transients
Stainless steel (1.4301)
Grey thermoplastic polyester
Black polyester
Transient voltage
EMC
≤ 700 V/0.5 J
Approved according to
IEC 60947-5-2
Connection
Cable
3,1 m, 3 x 0.3 mm2,
grey PUR, shield cable
Power ON delay
Frequency of operating
cycles (f)
Indication for output ON
Assured operating dist. (Sa)
< 10 ms
Weight (cable excluded)
Tightening torque
CE-marking
50 g
300 Hz
100.0 Nm
Yes
LED, yellow
0 ≤ Sa ≤ 0.81 Sn
Specifications are subject to change without notice (02.02.01)
1