ERGO-NAV EGN-J Series
Analog Joystick Navigation Device
Features/Benefits
Typical Applications
• Omni-directional analog control
• Variable speed (rate and control)
• Small form factor
• Cell phones
• Gaming devices
• MP3 players
• PDA’s
• Low power (instant wake-up)
• Integrated switch (center click)
• True deflection device (pointing device)
• Simple electrical interface
• Environmental protection
• Long life
• GPS devices
• Remote controls
• Laptops
• Convergent devices
• Others
Series Values
EGN-Jx3x-xx
EGN-Jx2x-xx
PCB FOOTPRINT REQUIREMENT (mm):
16.3 topside,
17.3 bottom
5.8
less than 2
25
23 or less
74
9
19.3 topside
20.3 bottom
7.5
less than 2
25
24 or less
120
20
17.3-20.3
5.8-7.5
less than 2
25
23-24
74-120
9-20
PCB TO ACTUATOR TIP HEIGHT (mm):
MIN ACTUATION ANGLE (deg):
C
MAX DEFLECTION FROM VERTICAL (deg):
LATERAL FORCE @ MIN ACTUATION (g force):
LATERAL FORCE @ MAX ACTUATION (g force):
MIN VERTICAL FORCE TO ACTIVATE (g force):
DOME SWITCH ACTUATION FORCE (g force):
SINGLE LARGE LATERAL FORCE SURVIVABLE (g force):
210-380
2000
210
2000
380
2000
User Interface
NUMBER OF AXSIS PROVIDED:
DIRECTIONS/VECTORS:
1, 2, 4 & continous
>360
NUMBER OF RATE STEPS FROM FULL:
SOUTH to FULL NORTH DEFLECTION
POSITION SAMPLING RATE:
Up to 1024
64 standard
25-40hz
40hz standard
< 4ms
SIGNAL LATENCY:
How To Order
A screw-mount
B solder-mount
EGN-J-
O for 360º omni-direction wth Z switch
U for 360º omni-direction wthout Z switch
V for N-way (N=1,2,4 axis) wth Z switch
W for N-way (N=1,2,4 axis) wthout Z switch
0 without dedicated PCB
1 with dedicated PCB
1 for 13mm base diameter
2 for 20mm base diameter
3 for 17mm base diameter
C for custom integration*
0 without dedicated microcontroller chip
1 with dedicated microcontroller chip
*Custom Integration - ErgoNav EGN-J Series can be customized per the design rules and limitations:
-Joystick footprint and actuator height (scalable per the design rules)
-Joystick top cap (plastic or silicone; color & fashion)
-Joystick plastic retainer (reference retainer integratable to device chassis per the design rules)
-Dedicated microcontroller (contains firmware for quick I/O interface, or firmware compiled into device controller)
Dimensions are shown: mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
C–19