RoHS
Pb
EB13C3C1H-31.500M
EB13C3 C 1 H -31.500M
Series
Nominal Frequency
RoHS Compliant (Pb-free) Low Current 3.3V 4 Pad
5mm x 7mm Ceramic SMD LVCMOS Oscillator
31.500MHz
Logic Control / Additional Output
Tri-State (High Impedance)
Frequency Tolerance/Stability
±100ppm over 0°C to +70°C
Duty Cycle
50 ±10(%)
ELECTRICAL SPECIFICATIONS
Nominal Frequency
31.500MHz
Frequency Tolerance/Stability
±100ppm over 0°C to +70°C (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability
over the Operating Temperature Range, Supply Voltage Change, Ouput Load Change, First Year Aging at
25°C, Shock, and Vibration)
Supply Voltage
3.3Vdc ±10%
Input Current
5mA Maximum
Output Voltage Logic High (Voh)
Input Current Logic High (Ioh)
Output Voltage Logic Low (Vol)
Input Current Logic Low (Iol)
Rise/Fall Time
90% of Vdd Minimum
-1.6mA
10% of Vdd Maximum
+1.6mA
4nSec Maximum (Measured at 20% to 80% of waveform)
50 ±10(%) (Measured at 50% of waveform)
15pF Maximum
Duty Cycle
Load Drive Capability
Output Logic Type
CMOS
Logic Control / Additional Output
Tri-State Input Voltage (Vih and Vil)
Tri-State (High Impedance)
90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High
Impedance)
Standby Current
10µA Maximum (Disabled Output: High Impedance)
25pSec Maximum
One Sigma Clock Period Jitter
Start Up Time
10mSec Maximum
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Method 210
Gross Leak Test
Mechanical Shock
Resistance to Soldering Heat
Resistance to Solvents
Solderability
MIL-STD-202, Method 215
MIL-STD-883, Method 2003
Temperature Cycling
Vibration
MIL-STD-883, Method 1010
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev A 2/16/2010 | Page 1 of 5