DS2430A
256-Bit 1-Wire EEPROM
www.maxim-ic.com
FEATURES
PIN ASSIGNMENT
256-bit Electrically Erasable Programmable
Read Only Memory (EEPROM) plus 64-bit
one-time programmable application register
Unique, factory-lasered and tested 64-bit
registration number (8-bit family code + 48-bit
serial number + 8-bit CRC tester) assures
absolute identity because no two parts are alike
Built-in multidrop controller ensures
compatibility with other MicroLAN products
EEPROM organized as one page of 32 bytes
for random access
TO-92
TSOC PACKAGE
DALLAS
DS2430A
1
2
3
6
5
4
TOP VIEW
3.7mm x 4.0mm x 1.5mm
SIDE VIEW
See Mech.
Drawing Section
Reduces control, address, data, and power to a
single data pin
1
2
3
4
3
Directly connects to a single port pin of a
microprocessor and communicates at up to
16.3kbits per second
8-bit family code specifies DS2430A
communication requirements to reader
Presence detector acknowledges when reader
first applies voltage
Low cost TO-92 or 6-pin TSOC and Flip Chip
surface mount package
Reads and writes over a wide voltage range of
2.8V to 6.0V from -40°C to +85°C
2430A
rrd#xx
1 2 3
1
2
Flip Chip, Top View
with Laser Mark,
BOTTOM VIEW
See Mech.
Drawings Section
Contacts Not Visible.
“rrd” = Revision/Date
#xx = Lot Number
See 56-G7016-001 for
package outline.
NOTE: The leads of TO-92 packages on tape-
and-reel are formed to approximately 100 mil
(2.54 mm) spacing. For details refer to drawing
56-G0006-003.
ORDERING INFORMATION
DS2430A
TO-92 Package
DS2430AP
DS2430A/T&R
6-pin TSOC Package
TO-92 Package, Tape & Reel
DS2430AP/T&R TSOC Package, Tape & Reel
PIN DESCRIPTION
DS2430A+
TO-92 Package
TO-92
Ground
Data
TSOC
Ground
Data
NC
Flip Chip
Ground
Data
NC
NC
DS2430AP+
DS2430A+T&R
6-pin TSOC Package
TO-92 Package, Tape & Reel
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
DS2430AP+T&R TSOC Package, Tape & Reel
NC
DS2430AX
DS2430AX-S
Flip Chip, 10k Tape & Reel
Flip Chip, 2.5k Tape & Reel
––––
––––
––––
NC
NC
NC
––––
––––
+ Indicates lead-free compliance.
1 of 16
080807