DS10BR254
www.ti.com
SNLS260D –DECEMBER 2007–REVISED APRIL 2013
DS10BR254 1.5 Gbps 1:4 LVDS Repeater
Check for Samples: DS10BR254
1
FEATURES
DESCRIPTION
The DS10BR254 is a 1.5 Gbps 1:4 LVDS repeater
optimized for high-speed signal routing and
distribution over FR-4 printed circuit board
backplanes and balanced cables. Fully differential
signal paths ensure exceptional signal integrity and
noise immunity.
2
•
DC - 1.5 Gbps Low Jitter, Low Skew, Low
Power Operation
•
Wide Input Common Mode Voltage Range
Allows for DC-Coupled Interface to LVDS, CML
and LVPECL Drivers
•
•
Redundant Inputs
The device has two different LVDS input channels
and a select pin determines which input is active. A
loss-of-signal (LOS) circuit monitors both input
channels and a unique LOS pin is asserted when no
signal is detected at that input.
LOS Circuitry Detects Open Inputs Fault
Condition
•
•
•
Integrated 100Ω Input and Output
Terminations
Wide input common mode range allows the switch to
accept signals with LVDS, CML and LVPECL levels;
the output levels are LVDS. A very small package
footprint requires a minimal space on the board while
the flow-through pinout allows easy board layout.
Each differential input and output is internally
terminated with a 100Ω resistor to lower device return
losses, reduce component count and further minimize
board space.
8 kV ESD on LVDS I/O Pins Protects Adjoining
Components
Small 6 mm x 6 mm WQFN-40 Space Saving
Package
APPLICATIONS
•
•
•
•
Clock Distribution
Clock and Data Buffering and Muxing
OC-12 / STM-4
SD/HD SDI Routers
Typical Application
CARD A
CARD C
ASIC/FPGA 1
ASIC/FPGA
ASIC/FPGA 2
DS10BR254
1:4 LVDS
Repeater
Discrete
Deserializer 1
Discrete
Serializer
Discrete
Deserializer 2
CARD B
BACKPLANE
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated