1N6267-1N6303A
Transient Voltage Suppressor
BREAKDOWN VOLTAGE: 6.8 --- 200 V
PEAK PULSE POWER: 1500 W
Features
DO-201AE
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
1500W peak pulse power capability with a 10/1000μs
waveform, repetition rate (duty cycle): 0.05%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for uni-directional and 5.0ns for bi-directional types
For devices with V(BR) 10V,ID are typically less than 1.0μA
High temperature soldering guaranteed:265 / 10 seconds,
0.375"(9.5mm) lead length, 51bs. (2.3kg) tension
Dimensions in millimeters
Mechanical Data
Case:JEDEC DO-201AE, molded plastic
Polarity: Color band denotes positive end
( cathode ) except for bidirectional
Weight: 0.032 ounces, 0.9 grams
Mounting position: Any
DEVICES FOR BIDIRECTIONAL APPLICATIONS
For bi-directional use C or CA suffixfor types 1N6267 thru types 1N6303A (e.g. 1N6267, 1N6303A).
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
SYMBOL
VALUE
UNIT
W
Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE1, FIG.1)
Peak pulse current w ith a 10/1000μs w aveform (NOTE1)
PPPM
IPPM
Minimum 1500
SEE TABLE 1
A
Steady state pow er dissipation at TL=75
ffffflead lengths 0.375"(9.5mm) (NOTE2)
PM(AV)
IFSM
6.5
W
A
Peak forw ard surge current, 8.3ms single half
ffffsine-w ave superimposed on rated load (JEDEC Method) (NOTE3)
200.0
Maximum instantaneous forw ard voltage at 100 A for unidirectional only (NOTE4)
Typical thermal resistance junction-to-lead
VF
RθJL
3.5/5.0
20
V
/W
/W
Typical thermal resistance junction-to-ambient
RθJA
75
Operating junction and storage temperature range
TJ, TSTG
-50---+175
NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2
(2) Mounted on copper pad area of 1.6" x 1.6"(40 x40mm2) per Fig. 5
(3) Measured of 8.3ms single half sine-w ave or equare w ave, duty cycle=4 pulses per minute maximum
(4) VF=3.5 Volt max. for devices of V(BR) 200V, and VF=5.0 Volt max. for devices of V(BR) >200V
http://www.luguang.cn
mail:lge@luguang.cn