DF1B Series■2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
■Product Specifications
AWG 20 to 24: 3A
)
)
-35 to +85ç (
-40 to 80%
Note2
Operating Temperature Range
Operating Moisture Range
AWG 26
AWG 28
AWG 30
250V AC
: 2A
Current rating
(Note1)
Rating
Cable Size
: 1A
-10 to +60ç (
Note3
Storage Temperature Range
Storage Moisture Range
: 0.5A
-40 to 70% (
)
Note3
Voltage rating
■UL CSA Safety File No.
UL : E52653
CSA : LR95109
UL-CSA Safety Standard Standardized Value
AWG 20 to 22: 3A
AWG 24 to 28: 1A
Current rating
(Note1)
Cable Size
Rating
AWG 30
30V AC
: 0.5A
Voltage rating
Item
1. Insulation Resistance 1000M ohms Min
2. Withstanding voltage No flashover or insulation breakdown.
3. Contact Resistance 30m ohms Max
4. Insertor/Extraction Force MIN0.44N (45gf), MAX4.4N(450gf)
5. Vibration No electrical discontinuity of 1µs or more
Specification
Condition
500V DC
650V AC/1 minute
100mA
Measure at the square steel pin of 0.635 0.002mm
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state) Contact resistance: 30m ohms max.Insulation resistance: 1000M ohms min. 96 hours at temperature of 40 2ç and humidity of 90% to 95%
(-55ç: 30 minutes ■■5 to 35ç: 10 minutes
7. Temperature Cycle
Contact resistance: 30m ohms max:Insulation resistance: 1000M ohms min.
(-85ç: 30 minutes ■■5 to 35ç: 10 minutes) 5 cycles
Tin plating : 30 cycles
8. Operating Life
Contact resistance: 30m ohms max.
Gold plating : 50 cycles
Flow: 250ç for 10 seconds
9. Resistance to Soldering heat No deformation of components affecting performance.
Manual soldering: 300ç for 3 seconds
Note 1: Current rating of header is 3A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a
specific part number shown.
■Material
Product
Socket
Part
Material
Polyamide
Finish
Remarks
UL94V-0
––––––
––––––
UL94V-0
––––––
UL94V-0
––––––
––––––
Insulator
Contact
Contact
Insulator
Contact
Insulator
Contact
Contact
White
ID Contact for Socket
Crimping Contact for Socket
Phosphor copper
Phosphor copper
Polyamide
Tin plated or gold plated
Tin plated or gold plated
White
Pin Header
Brass
Tin plated or gold plated
White
In-line Plug
Polyamide
ID Contact for In-line Plug
Crimping Contact for In-line Plug
Phosphor copper
Phosphor copper
Tin plated or gold plated
Tin plated or gold plated
B185