DCQAW100 SERIES
Up to 90 Watts, Quarter-Brick DC/DC Converters
Rev D
FEATURES
• Soft Start
• Single Outputs
• Input Under Voltage Protection
• High Efficiency up to 90%
• Up to 90 Watts Maximum Output Power
• 2250VDC I/O Basic Insulation
• Short Circuit, Over Voltage, Over Load, & Over Temp.
Protection
• Remote ON/OFF Control
• UL60950-1, EN60950-1, IEC60950-1, EN45545-2 & EN50155
Safety Approvals
• CE Marked
• 4:1 Ultra Wide Input Voltage Ranges
• No Minimum Load Required
• Low Stand-by Power Consumption
• Optional Heatsinks Available (Suffix “HS”)
• Industry Standard Quarter-brick Package • Threaded (Standard) or Thru-Hole (Optional) Inserts Available
Size:
• Compliant to RoHS II & Reach
• Railway Applications
2.28 x 1.45 x 0.50 inches
(57.9 x 36.8 x 12.7 mm)
DESCRIPTION
Applications:
The DCQAW100 series of DC/DC power converters provides up to 90 Watts of output power in a 2.28” x
1.45” x 0.5” industry standard quarter-brick package. This series has single output models with 4:1 wide input
voltage ranges of 8.5-36VDC, 16.5-75VDC, and 40-160VDC. Some features include high efficiency up to
90%, 2250VDC I/O basic insulation, and remote ON/OFF control. These converters are also protected
against input under voltage, short circuit, over voltage, over load, and over temperature conditions. All models
are RoHS compliant and have UL60950-1, EN60950-1, IEC60950-1, EN45545-2 and EN50155 safety
approvals. Several different options are available for this series including negative logic remote ON/OFF,
heatsinks, and thru-hole inserts.
• Railway Systems
• Measurement
• Telecom/Datacom
• Industry Control Systems
• IPC
• Automation
• Military
MODEL SELECTION TABLE
Output
Voltage
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
24 VDC
30 VDC
48 VDC
Output Current
Output
No Load
Output
Power
82.5W
90W
90W
90W
88.8W
90W
86.4W
82.5W
90W
Maximum
Capacitive Load
75,000µF
36,000µF
6250µF
Model Number
Input Voltage
Efficiency
Min Load
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
0mA
Max Load Ripple & Noise Input Current
DCQAW100-24S33
DCQAW100-24S05
DCQAW100-24S12
DCQAW100-24S15
DCQAW100-24S24
DCQAW100-24S30
DCQAW100-24S48
DCQAW100-48S33
DCQAW100-48S05
DCQAW100-48S12
DCQAW100-48S15
DCQAW100-48S24
DCQAW100-48S30
DCQAW100-48S48
DCQAW100-110S33
DCQAW100-110S05
DCQAW100-110S12
DCQAW100-110S15
DCQAW100-110S24
DCQAW100-110S30
DCQAW100-110S48
25A
18A
7.5A
6A
3.7A
3A
1.8A
25A
18A
7.5A
6A
3.7A
3A
1.8A
23A
17A
7A
75mVp-p
75mVp-p
25mA
25mA
25mA
25mA
25mA
25mA
25mA
15mA
15mA
15mA
15mA
15mA
15mA
15mA
8mA
88%
89%
89%
89%
89%
89%
88%
88%
89%
89%
90%
90%
90%
90%
88%
89%
89%
89%
89%
89%
89%
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
24 VDC
4000µF
1540µF
1000µF
380µF
75,000µF
36,000µF
6250µF
4000µF
1540µF
1000µF
380µF
70,000µF
34,000µF
5830µF
3670µF
1460µF
930µF
380µF
(8.5 - 36 VDC)
75mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
75mVp-p
90W
90W
48 VDC
(16.5 - 75 VDC)
88.8W
90W
86.4W
75.9W
85W
84W
82.5W
84W
75mVp-p
8mA
8mA
8mA
8mA
8mA
8mA
100mVp-p
100mVp-p
200mVp-p
200mVp-p
300mVp-p
110 VDC
5.5A
3.5A
2.8A
1.8A
(40 - 160 VDC)
84W
86.4W
NOTES
1. Input Source Impedance: The power modules will operate to specifications without external components, assuming that the source voltage has very low
impedance and reasonable input voltage regulation. Highly inductive source impedances can affect the stability of the power module. Since real-world
voltage sources have finite impedance, performance is improved by adding an external filter capacitor.
- For 24VDC & 48VDC input models we recommend using Nippon Chemi-con KY series, 100µF/100V.
- For 110VDC input models we recommend using Ruby-con BXF series, 39µF/200V.
2. If remote sense is not being used, sense pins should connect to the output pins with the same polarity.
3. The DCQAW100 series can only meet EMI Class A or Class B with external components added. Please contact factory for more information.
4. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
- For 24VDC & 48VDC input models we recommend 2pcs of aluminum electrolytic capacitor (Nippon chemi-con KY series, 220µF/100V
- For 110VDC input models we recommend 3pcs of aluminum electrolytic capacitor (Ruby-con BXF series, 100µF/250V)
5. Both positive logic and negative logic remote ON/OFF control is available. Positive logic remote ON/OFF comes standard; for negative logic remote
ON/OFF add the suffix “R” to the model number (Ex: DCQAW100-48S24R).
6. Optional heatsinks available. See page 5 for ordering details.
7. M3 x 0.5 threaded-thru inserts come standard. For Ø.126 thru-hole inserts add the suffix “TH” to the model number (Ex: DCQAW100-48S24TH). Models
with thru- hole inserts cannot be equipped with a heatsink.
8. BASE-PLATE GROUNDING: EMI can be reduced when you connect two screw bolts to the shield plane.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
09/18/2017
Fax 603-778-9797
Page 1 of 7
website: www.wallindustries.com • e-mail: sales@wallindustries.com
5秒后页面跳转
Pickering新高压舌簧继电器亮相汽车测试博览会
采用MCU+MPU双处理器架构实现的创新应用设计探索
解读L9904TR手册资料：产品概述、主要功能、电气参数
芯片底部填充工艺：提升电子设备可靠性的关键步骤
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
