D_T-1W Series
1W, FIXED INPUT, ISOLATED & UNREGULATED
TWIN OUTPUT ULTRAMINIATURE SMD PACKAGE
DC-DC CONVERTER
RoHS
FEATURES
SELECTION GUIDE
● Efficiency up to 80%
● Twin Independent Output
● Small Footprint
● SMD Package Styles
● Industry Standard Pinout
● No Heatsink Required
● 1kVDC Isolation
Input
Voltage (VDC)
Nominal Range
Output
Part
Number
Efficiency
(%,Typ.)
Current (mA)
Voltage
(VDC)
Max.
100/100
56/56
Min.
10/10
6/6
D050505T-1W
D050909T-1W *
D051212T-1W
D051515T-1W *
D120505T-1W *
D120909T-1W *
D121212T-1W
D121515T-1W
*Designing.
5/5
9/9
70
75
79
80
72
75
78
80
5
4.5-5.5
12/12
15/15
5/5
42/42
4/4
● High Power Density
33/33
3/3
● Temperature Range: -40°C ~ +85°C
● No External Component Required
● Internal SMD construction
● RoHS Compliance
100/100
56/56
10/10
6/6
9/9
12
10.8-13.2
12/12
15/15
42/42
4/4
33/33
3/3
Note: The D_T-W2/W5 series also are available in our company.
APPLICATIONS
The D_T-1W series are specially designed for
applications where a group of polar power
supplies are isolated from the input power
supply in a distributed power supply system on
a circuit board. These products apply to:
1) Where the voltage of the input power
supply is fixed (voltage variation ≤±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤1000VDC);
3) Where the regulation of the output voltage
and the output ripple and noise are not
demanding.
COMMON SPECIFICATIONS
Item
Test condition
Min.
Typ.
Max.
Unit
%
Storage humidity
Operating temperature
Storage temperature
Temp. rise at full load
Lead temperature
Short circuit protection*
Cooling
95
85
-40
-55
125
25
°C
15
1.5mm from case for 10 seconds
300
1
s
Free air convection
Epoxy Resin (UL94-V0)
3500 K hours
package material
MTBF
Such as: purely digital circuits, ordinary low
frequency analog circuits and IGBT power
device driven circuits, etc.
Weight
2.1
g
*Supply voltage must be discontinued at the end of short circuit duration.
PART NUMBER SYSTEM
D050505T-1W
ISOLATION SPECIFICATIONS
Rated Power
Item
Test condition
Min.
Typ.
Max.
Unit
Package Style
Isolation voltage
(Vin/Vout)
Isolation voltage
(Vo1/Vo2)
Isolation resistance
(Vin/Vout)
Isolation resistance
(Vo1/Vo2)
Isolation capacitance
(Vin/Vout)
Isolation capacitance
(Vo1/Vo2)
The 2nd Output Voltage
The 1st Output Voltage
Input Voltage
Tested for 1 minute and 1mA max
1000
VDC
Tested for 1 minute and 1mA max
Test at 500VDC
1000
1000
1000
Product Series
MΩ
Test at 500VDC
MORNSUN Science & Technology Co.,Ltd.
Address: No. 5, Kehui St. 1, Kehui development
center, Science Ave., Guangzhou Science City,
Luogang district, Guangzhou,P.R.China.
Tel: 86-20-28203030
60
60
pF
Fax:86-20-38601272
Http://www.mornsun-power.com
The copyright and authority for the interpretation of the products are reserved by MORNSUN
Specifications subject to change without notice.
D_T-1W B/1-2012 Page 1 of 3