Sensus™ LED Series Product Datasheet
Product Ordering and Shipping Part Number Nomenclature
All Sensus LED products are packaged and labeled with part numbers as outlined in the table on page 5ꢀ Luminus will include any
smaller chromaticity bin that is contained in the larger bin as part of the ordered partꢀ When shipped, each package will contain only a
single flux and chromaticity binꢀ The part number designation is as follows:
CXM
XX
30
80
36
QQPP
FG
W
Light Emit-
ting Surface
Diameter1
Color Ren-
dering Index
(CRI)3
Product Fam-
ily
Color
Voltage (typi-
cal)
Package
Configurator
Chromaticity
Bin
Flux Bin
Temperature2
XX: LES
Diameter
(mm) Approxi-
mate
CIM/ CLM/
CXM: Chip on
Board
AA32
(Basic pack-
age)
Volts Also 54V
in some cases
See page 3 for
bins
CCT
XX
Lumens
Note 1 : XX nomenclature corresponds to the following:
9 = 9.6 mm
11 = 11.6 mm
14 = 14.3 mm
18 = 17.5 mm
22 = 22 mm
27 = 26.5mm
Note 2: CT Nomenclature corresponds to the following
30 is 3000K
35 is 3500K
Note 3: XX Color Rendering nomenclature corresponds to the following
80 = 80 CRI
90 = 90 CRI
Note 4: AA32 is the Standard Sensus and a standard substrate size
AA34 is the Xtreme Sensus and a standard substrate size
AC32 and XD22 is the Standard Sensus and alternative substrate size
AC34 is the Xtreme Sensus and an alternative substrate size
Color Temperature, CRI and R9 Values
Color Temperatures
3000K, 3500K
XX Value
80
CRI
>80
>90
R9
>0
90
>50
Note:
Luminus part numbers may be accompanied by prefixes or suffixesꢀ The most common is the“Rev01”suffix indicating a part is fully released
and carries a full warrantyꢀ These additional characters may appear on shipping labels, packing slips and invoicesꢀ In all cases the basic part
number described above will always be includedꢀ
4
PDS-002832 Rev 12
© 2018 Luminus Devices, Inc. - All Rights Reserved