CXM-11 Product Datasheet
(Part #) Product Datasheet
Chemical Compatibility
The resin material used to form the LES can getter hydrocarbons from the surrounding environment. As a result, certain chemical
compounds (HꢀSOꢁ, HꢀS, SOꢀ, NHꢂ, HꢂPOꢁ etc.) are not recommended for use with the Luminus products. Use of these compounds can
cause damage to the light output of the device and may permanently damage the device. Please refer to the table below for a list of the
compounds not recommended for use with the Luminus COB products.
Common Chemicals Know to Adversely Affect Luminus Devices
Acetates
Acetic acid
Acrylates
Aldehydes
Aldehydes
Amines
Ethers
Cl, F or Br containing compounds
Liquid hydrocarbons
Hydrochloric Acid
Ketones
Potassium hydroxide
Siloxanes, fatty acids
Sodium Hydroxide
Sulfur compounds
Sulfuric Acid
Nitric Acid
Toluene
Benzene
Dienes
Phosphoric acid
Xylenes
Thermal Interface Material (TIM)
Proper thermal management is critical for successful operation of any LED system. Excess operating temperature can reduce the light
output of the device. And excessive heating can cause permanent damage to the device. Proper TIM material is a crucial component for
effective heat transfer away from the LED during normal operation. Please refer to www.luminus.com for specific recommendations for
TIM solutions.the compounds not recommended for use with the Luminus COB products.
Please refer to https://www.luminus.com/resource/application-notes for more application note information.
11
Luminus Devices, Inc. • www.luminus.com
1145 Sonora Court Sunnyvale, CA 94086 USA
PDS-003002 Rev 02
© 2020 Luminus Devices, Inc. - All Rights Reserved