CS
www.vishay.com
Vishay Dale Thin Film
Ceramic Sandwich, Single-In-Line Thin Film Resistor,
Through Hole Network (Low Profile 0.20 Custom)
FEATURES
• Gold-to-gold terminations. External leads are
attached directly to gold pads on the ceramic
substrate by thermo-compression bonding (no
internal solder)
• Low profile (0.200 min.)
• Custom pin-outs available
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
Actual Size
Note
* Pb containing terminations are not RoHS compliant, exemptions
Vishay Dale Thin Film presents a design concept in precision
thin film resistor networks. The essence of this new concept
is the marriage of two principle design elements . . . a unique
resistive film, having electrical properties comparable to
those of wire-wound resistors, and a rugged, low cost,
ceramic package and an almost limitless variety of sizes and
configurations.
may apply
TYPICAL PERFORMANCE
ABSOLUTE
TRACKING
2
TCR
TOL.
25
ABSOLUTE
0.05
RATIO
0.01
SCHEMATIC
Custom schematics available.
Please consult factory.
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Passivated nichrome
Tantalum nitride
-
-
-
Pin/Lead Number
Resistance Range
TCR: Absolute
3 to 10
20 to 2000 k (total)
10 ppm/ꢀC to 25 ppm/ꢀC
2 ppm/ꢀC
20 to 500 k (total)
50 ppm/ꢀC to 100 ppm/ꢀC
5 ppm/ꢀC
- 55 ꢀC to + 125 ꢀC
TCR: Tracking
- 55 ꢀC to + 125 ꢀC
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
0.05 % to 1.0 %
+ 25 ꢀC
0.01 % to 0.5 %
0.02 % to 0.5 %
+ 25 ꢀC
100 mW (per element)
Typical at + 25 ꢀC
-
-
R 0.05 %
R 0.015 %
< 0.1 ppm/V
R 0.1 %
R 0.02 %
< 0.1 ppm/V
2000 h at + 70 ꢀC
2000 h at + 70 ꢀC
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
-
100 V
-
- 55 ꢀC to + 125 ꢀC
- 55 ꢀC to + 150 ꢀC
< - 30 dB
-
-
-
Thermal EMF
< 0.08 μV/ꢀC
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at + 25 ꢀC
1 year at + 25 ꢀC
Revision: 20-Oct-11
Document Number: 60081
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000