5秒后页面跳转
CR16MPS5 PDF预览

CR16MPS5

更新时间: 2024-09-26 23:43:31
品牌 Logo 应用领域
其他 - ETC /
页数 文件大小 规格书
2页 50K
描述

CR16MPS5 数据手册

 浏览型号CR16MPS5的Datasheet PDF文件第2页 
December 2001  
CR16MES5/CR16MES9/CR16MFS5/CR16MFS9/  
CR16MHS5/CR16MHS9/CR16MNS5/CR16MNS9/  
CR16MPS5/CR16MUS5/CR16MUS9  
CompactRISC 16-Bit Microcontrollers  
General Description  
Features  
n CPU Features  
The family of CompactRISC microcontrollers are general-  
— Fully static core, capable of operating at any rate  
from 0 to 24MHz (4 MHz minimum in active mode)  
— Multi-source vectored interrupts (internal, external,  
and on-chip peripheral)  
— On-chip power-on reset  
n On-Chip Memory  
purpose 16-bit microcontrollers based on a Reduced Instruc-  
tion Set Computer (RISC) architecture. The device operates  
as a complete microcomputer with all system timing, inter-  
rupt logic, flash program memory or ROM memory, RAM,  
EEPROM data memory, and I/O ports included on-chip. It is  
ideally suited to a wide range of embedded controller appli-  
cations because of its high performance, on-chip integrated  
features and low power consumption, resulting in decreased  
system cost.  
— 48 kbytes of flash program memory or ROM memory  
(100K cycle)  
— 1.5 kbytes of ISP memory (100K cycle)  
— 2 kbytes of static RAM data memory  
— 640 bytes of non-volatile EEPROM data memory,  
word-programmable (100K cycle)  
n On-Chip Peripherals  
— Up to two Universal Synchronous/Asynchronous  
Receiver/Transmitter (USART) devices  
— Programmable Idle Timer and real-time clock (T0)  
— Up to two dual 16-bit multi-function timers (MFT1 and  
MFT2)  
— SPI/MICROWIRE-PLUS serial interface  
— 8-channel, 8-bit Analog-to-Digital (A/D) converter with  
external voltage reference, programmable  
sample-and-hold delay, and programmable  
conversion frequency  
— Up to two analog comparators  
— Integrated WATCHDOG logic  
n I/O Features  
— Up to 48 general-purpose I/O pins (shared with  
on-chip peripheral I/O pins)  
— Programmable I/O pin characteristics: TRI-STATE  
output, push-pull output, weak pull-up input,  
high-impedance input  
— Software-configurable Schmitt triggers on inputs  
n Power Supply  
— 4.5V to 5.5V single-supply operation  
n Temperature Range  
— 0˚C to +70˚C  
— –40˚C to +85˚C  
— –40˚C to +125˚C  
n Development Support  
— Real-time emulation and full program debug  
capabilities available  
The family of CompactRISC 16-bit microcontrollers offer the  
high performance of a RISC architecture while retaining the  
advantages of a traditional Complex Instruction Set Com-  
puter (CISC): compact code, on-chip memory and I/O, and  
reduced cost. The CPU uses a three-stage instruction pipe-  
line that allows execution of up to one instruction per clock  
cycle, or up to 20 million instructions per second (MIPS) at a  
clock rate of 24MHz.  
In the following text, device is alsays refered to the family of  
CompactRISC 16-bit microcontrollers. For the exact feature  
set, check individual datasheets.  
The device is available in a variety of package sizes and  
types. All devices have 48 kbytes of reprogrammable flash  
program memory, 1.5 kbytes of ISP memory, 2 kbytes of  
static RAM, and 640 bytes of non-volatile EEPROM data  
memory. The 80-pin device has two USARTs, two 16-bit  
multi-function timers, one SPI/MICROWIRE-PLUS serial  
interface, an 8-channel A/D converter, two analog compara-  
tors, WATCHDOG protection mechanism, and up to 48  
general-purpose I/O pins. The 44-pin devices offer the same  
basic features as the 80-pin device, but with fewer I/O ports  
and peripheral modules due to the smaller number of avail-  
able pins.  
All devices operate with a high-frequency crystal as the main  
clock source. Some packages allow the device to operate  
with either the main clock source or with a slow (32.768 KHz)  
oscillator in Power Save mode. The device supports several  
Power Save modes which are combined with multi-source  
interrupt and wake-up capabilities.  
Powerful cross-development tools are available from Na-  
tional Semiconductor and third party suppliers to support the  
development and debugging of application software for the  
device. These tools let you program the application software  
in C and are designed to take full advantage of the Compac-  
tRISC architecture.  
— CompactRISC tools provide C programming and  
debugging support  
Please check the web for the latest update to this datasheet.  
© 2001 National Semiconductor Corporation  
DS200321  
www.national.com  

与CR16MPS5相关器件

型号 品牌 获取价格 描述 数据表
CR16MPS544V7XXX TI

获取价格

IC,MICROCONTROLLER,16-BIT,CR16B CPU,CMOS,LDCC,44PIN,PLASTIC
CR16MPS544V7XXX/NOPB TI

获取价格

IC,MICROCONTROLLER,16-BIT,CR16B CPU,CMOS,LDCC,44PIN,PLASTIC
CR16MPS544V8XXX/NOPB TI

获取价格

IC,MICROCONTROLLER,16-BIT,CR16B CPU,CMOS,LDCC,44PIN,PLASTIC
CR16MPS544V8Y TI

获取价格

IC 16-BIT, MROM, 20 MHz, RISC MICROCONTROLLER, PQCC44, PLASTIC, LCC-44, Microcontroller
CR16MPS544V9XXX/NOPB TI

获取价格

IC,MICROCONTROLLER,16-BIT,CR16B CPU,CMOS,LDCC,44PIN,PLASTIC
CR16MPS544V9Y TI

获取价格

IC 16-BIT, MROM, 20 MHz, RISC MICROCONTROLLER, PQCC44, PLASTIC, LCC-44, Microcontroller
CR16MPS544VC NSC

获取价格

Family of CompactRISC 16-Bit Microcontrollers
CR16MPS544VI NSC

获取价格

Family of CompactRISC 16-Bit Microcontrollers
CR16MPS9 ETC

获取价格

CR16MPS944V8 ETC

获取价格

Microcontroller