5秒后页面跳转
CDF7623-000 PDF预览

CDF7623-000

更新时间: 2024-09-26 23:13:27
品牌 Logo 应用领域
阿尔法 - ALPHA 肖特基二极管
页数 文件大小 规格书
3页 299K
描述
Silicon Schottky Diode Chips

CDF7623-000 数据手册

 浏览型号CDF7623-000的Datasheet PDF文件第2页浏览型号CDF7623-000的Datasheet PDF文件第3页 
Silicon Schottky Diode Chips  
Features  
I For Detector and Mixer Applications  
I Low Capacitance for Usage Beyond 40 GHz  
I ZBD and Low Barrier Designs  
I P-Type and N-Type Junctions  
I Large Bond Pad Chip Design  
Description  
Alpha’s product line of silicon Schottky diode chips are  
intended for use as detector and mixer devices in hybrid  
integrated circuits at frequencies from below 100 MHz to  
higher than 40 GHz. Alpha’s “Universal Chip” design  
features a 4 mil diameter bond pad that is offset from the  
semiconductor junction preventing damage to the active  
junction as a result of wire bonding.  
In a detector circuit operating at zero bias, depending on  
the video load impedance, a ZBD device with RV less than  
10 kmay be more sensitive than a low barrier diode with  
RV greater than 100 k. Applying forward bias reduces  
the diode video resistance as shown in Figure 2. Lower  
video resistance also increases the video bandwidth but  
does not increase voltage sensitivity, as shown in  
Figure 3. Biased Schottky diodes have better temperature  
stability and also may be used in temperature  
compensated detector circuits.  
As power-sensing detectors, these Schottky diode chips  
all have the same voltage sensitivity so long as the output  
video impedance is much higher than the video  
resistance of the diode. Figure 1 shows the expected  
detected voltage sensitivity as a function of RF source  
impedance in an untuned circuit. Note that sensitivity is  
substantially increased by transforming the source  
impedance from 50 to higher values. Maximum  
sensitivity occurs when the source impedance equals the  
video resistance.  
P-type Schottky diodes generate lower 1/F noise and are  
preferred for Doppler mixers and biased detector  
applications.The bond pad for the P-type Schottky diode  
is the cathode. N-type Schottky diodes have lower parasitic  
resistance, RS, and will perform with lower conversion loss  
in mixer circuits. The bond pad for the N-type Schottky  
diode is the anode.  
Electrical Specifications at 25°C  
1
2
3
CJ  
RT  
VF @ 1 mA  
(mV)  
VB  
RV @ Zero Bias  
Junction  
Type  
Outline  
Drawing  
Part Number  
Barrier  
(pF)  
Max.  
0.25  
0.15  
0.10  
0.15  
0.10  
0.30  
()  
Max.  
30  
(V)  
(k)  
Min.–Max.  
135–240  
150–300  
275–375  
250–350  
270–350  
240–300  
Min.  
Typ.  
5.5  
CDC7630-000  
CDC7631-000  
CDB7619-000  
CDB7620-000  
CDF7621-000  
CDF7623-000  
ZBD  
ZBD  
Low  
Low  
Low  
Low  
P
P
P
P
N
N
1
2
2
2
2
2
526-006  
526-006  
526-006  
526-006  
526-011  
526-011  
80  
7.2  
40  
735  
537  
680  
245  
30  
20  
10  
1. CJ for low barrier diodes specified at 0 V. CJ for ZBDs specified at 0.15 V  
reverse bias.  
2. RT is the slope resistance at 10 mA. RS Max. may be calculated from:  
RS = RT - 2.6 x N.  
3. VB for low barrier diodes is specified at 10 µA. VB for ZBDs is specified  
at 100 µA.  
Alpha Industries, Inc. [781] 935-5150 Fax [617] 824-4579 Email sales@alphaind.com www.alphaind.com  
1
Specifications subject to change without notice. 8/01A  

与CDF7623-000相关器件

型号 品牌 获取价格 描述 数据表
CDF7623-108 SKYWORKS

获取价格

Mixer Diode, Silicon, ROHS COMPLIANT, HERMETIC SEALED PACKAGE-2
CDF7623-526-001 SKYWORKS

获取价格

Mixer Diode, Low Barrier, X Band, Silicon
CDF8000 COILCRAFT

获取价格

Surface Mount, 10- and 8-Line Data Line EMI Filters
CDF8500 COILCRAFT

获取价格

Surface Mount, 10- and 8-Line Data Line EMI Filters
CDFCCA-25M000 VECTRON

获取价格

3.3, 5.0 volt CMOS Oscillator
CDFCCA-25M125 VECTRON

获取价格

3.3, 5.0 volt CMOS Oscillator
CDFCCJ-0M01200000 MICROSEMI

获取价格

暂无描述
CDFCCJ-190M000000 MICROSEMI

获取价格

暂无描述
CDFCCJ-25M0000000 MICROSEMI

获取价格

暂无描述
CDFCCJ-25M125 VECTRON

获取价格

3.3, 5.0 volt CMOS Oscillator