CCM02 MK I
Construction
CCM02 MK I is a connector with landing
contacts.
Contacts
Plating
Copper alloy
Contact area : Gold over Nickel
Terminals : Tin lead (2µ min)
Thermoplastic UL 94V-0 rated
Features
Moldings
• Available with 8 through hole
contacts.
Mechanical Data
Number of Contacts
Mechanical life
Card insertion force
Card extraction force
Contact force
8
• 100,000 card insertion cycles.
100,000 cycles min
10 N max
1 N min / 10 N max
0.15 N min / 0.35 N max
Frequency 10 to 500 Hz. Acceleration 50m/s
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
• The contacts do not touch the card
until it is almost fully inserted -
a minimal wiping action removes
any non-conductive material.
2
Vibration
• The connector has been designed to
give a positive feel as the card is fully
inserted.
2
Shock
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• For added reliability, the integrated
card end-travel switch (which is
normally open) is sealed against dust
and grit.
Contact Electrical Data
Insulation resistance
Resistance
1,000 MΩ min
100 mΩ max
Current rating
Dielectric strength
10 µA min / 1 A max
750 Vrms min
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open
100 mΩ max
250 Vrms min
1 mA min / 10 mA max
0.2 VA
Maximum power
Environmental Data
Operating temperature
Soldering temperature
Damp heat
Salt mist
Card detection switch
-40°C to +85°C
Wave: 260°C / 5 sec
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54
Ordering Code
Part Number
CCM02-1N0-3
CCM02-1N0-32
CCM02-1N0-35
Number of Contacts
Packaging Multiple
8
8
300
300
200
8 with extended cover
Packaging
30 per tray, 10 trays per box.
Exception: CCM02-1NO-35, 20 per tray, 10 per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
13