CCM02 MK II
EMVTM compatible
Construction
The CCM02 MK II connectors with
landing contacts are dedicated for
applications where the reader usage is
high and the life span of the card is a
key consideration. A connector with
contacts which land on the card, rather
than slide over it, should be specified so
as to minimize card wear. The CCM02
has been redesigned to give an even
higher performance in a compact,
affordable package.
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals: Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Moldings
Spring
Card detection switch actuator
Stainless steel
Mechanical Data
Number of Contacts
Mechanical life
8
500,000 cycles min
10 N max
Card insertion force
Card extraction force
Contact force
1 N min / 10 N max
0.25 N min / 0.5 N max
Features
Card detection switch
0.8 N max for actuation (end travel switch
actuation force
actuates when card is 1,0 mm from
• 500,000 card insertion cycles.
card stop) 1.8 N max for complete depression
2
• The contacts do not touch the card
until it is almost fully inserted – A
minimal wiping action removes any
non-conductive material.
Vibration
Shock
Frequency 10 to 500 Hz. Acceleration 50m/s
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
2
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• The connector has been designed to
give a positive indication once the
card has been fully inserted.
Contact Electrical Data
Insulation resistance
Resistance
Current rating
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
• The reduced size of the contact base
saves PCB space, making the
Dielectric strength
connector more stable during surface
mounting, and creates an air gap
between the contacts and card entry
slot, which reduces the risk of an
electrostatic transfer to the PCB.
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open
100 mΩ max
250 Vrms min
1 mA min / 10 mA max
0.2 VA
• For added reliability, the integrated card
end-travel switch, which is normally
open, is sealed against dust and grit.
Maximum power
Environmental Data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
Damp heat
Salt mist
Card detection switch
• The contact area is spooned to reduce
the risk of accidental (or deliberate)
damage and to optimize the electrical
connection with the card.
Ordering Code
Part Number Number of Termination
PCB
Locating
Packaging
Multiple
Contacts
Tails Design
• Snap-locks underneath the molding
position and hold the connector on
the PCB, and give additional support
to the contact terminals.
CCM02-2503
CCM02-2504
CCM02-2508
CCM02-2511
CCM02-2512
CCM02-2758
CCM02-2763
CCM02-2765
CCM02-2766
8
8
8
8
8
8
8
8
8
Through Hole 4 Board Lock (PCB 1.6 mm thick)
300
300
300
300
300
300
300
300
300
SMT
SMT
4 Board Lock (PCB 1.6 mm thick)
2 Pegs
Through Hole
SMT
4 Pegs
4 Pegs
• The plastic moldings are made from a
high temperature thermoplastic suited
for infrared and convection soldering
processes.
SMT
SMT
2 Pegs (without cover)
4 Board Lock + 2 Pegs
Through Hole 4 Board Lock (PCB 1mm thick)
SMT 4 Board Lock (PCB 1mm thick)
Packaging
TM
EMV is a trademark owned by EMVCoLLC.
30 per tray, 10 trays per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
15