Surface Mount Multilayer Ceramic Chip Capacitors, (SMD MLCCs)
High Voltage X7R Dielectric, 500 – 3,000 VDC (Automotive Grade)
Electrical Parameters/Characteristics
Item
Parameters/Characteristics
Operating Temperature Range
−55°C to +125°C
±15%
Capacitance Change with Reference to
+25°C and 0 Vdc Applied (TCC)
1Aging Rate (Maximum % Capacitance Loss/Decade Hour)
3.0%
150% of rated voltage for voltage rating of < 1000V
120% of rated voltage for voltage rating of ≥ 1000V
(5±1 seconds and charge/discharge not exceeding 50mA)
2Dielectric Withstanding Voltage (DWV)
3Dissipation Factor (DF) Maximum Limit at 25°C
4Insulation Resistance (IR) Minimum Limit at 25°C
2.5%
See Insulation Resistance Limit Table
(500VDC applied for 120±5 seconds at 25°C)
1 Regarding Aging Rate: Capacitance measurements (including tolerance) are indexed to a referee time of 1,000 hours.
2 DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the
capacitor.
3 Capacitance and dissipation factor (DF) measured under the following conditions:
1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance ≤10µF
120Hz ± 10Hz and 0.5 ± 0.1 Vrms if capacitance >10µF
4 To obtain IR limit, divide MΩ-µF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON".
Post Environmental Limits
High Temperature Life, Biased Humidity, Moisture Resistance
Rated DC
Voltage
Capacitance Dissipation Factor Capacitance
Insulation
Dielectric
X7R
Value
(Maximum %)
Shift
Resistance
> 25
16/25
< 16
3.0
10% of Initial
Limit
All
5.0
7.5
±20%
Insulation Resistance Limit Table (X7R Dielectric)
1,000 Megohm
EIA Case Size
100 Megohm
Microfarads or 10 GΩ
Microfarads or 100 GΩ
0603
0805
1206
1210
1808
1812
1825
2220
2225
N/A
All
< .0039 µF
< 0.012 µF
< 0.033 µF
< 0.018 µF
< 0.027 µF
< 0.120 uF
< 0.150 uF
< 0.180 uF
≥ .0039 µF
≥ 0.012 µF
≥ 0.033 µF
≥ 0.018 µF
≥ 0.027 µF
≥ 0.120 uF
≥ 0.150 uF
≥ 0.180 uF
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1076_X7R_HV_AUTO_SMD • 11/21/2016
5