HIGH VOLTAGE POWER SUPPLY
SOCKET ASSEMBLY (DP TYPE)
C13002 SERIES
The C13002 series is a high voltage power supply socket assembly
for head-on photomultiplier tubes (PMT), incorporating a regulated
high voltage power supply and an active voltage divider. It enables
simple yet stable PMT operations with extended DC output linearity
by only supplying +15 V and connecting to a potentiometer or a 0 to
+6 V for high voltage adjustment.
FEATURES
GSuperior DC output linearity
GLow power consumption
GFast high voltage programming response
GLow anode ripple/noise
SPECIFICATIONS
Parameter
C13002-01
C13002-02
Unit
Head-on type
R6231, R6232, R6233, R6234
R6235, R6236, R6237, etc.
+15
Head-on type
R1306, R1307, etc.
Applicable photomultiplier tubes
—
Input voltage
Max. input voltage
Max. input current A
1
V
V
mA
µA
+18
60
65
Linear DC output current of PMT BC
Min.
Typ.
Max.
100
0.5
1
PMT
Anode ripple / noise D
mV p-p
Output voltage range
Specification guaranteed output voltage range
Line regulation against 1 V input voltage change B
0 to -1500
-200 to -1500
0.01
V
V
%
High
voltage Output voltage control
Control voltage (0 to +6 V) or potentiometer (50 kΩ)
—
power Recommended output voltage control range
supply Control voltage input impedance
Output voltage programming response E Max.
+0.8 to +6
V
100
80
0.01
kΩ
ms
%/°C
—
—
g
Temperature coefficient B
Operating ambient temperature / humidity F
Storage temperature / humidity F
Weight
Typ.
0 °C to +45 °C / Below 85 %
-15 °C to +60 °C / Below 90 %
122
Typ.
NOTE: AWithout PMT
BInput voltage = +15 V, control voltage = +4 V
CWithin 2 % linearity
DCable RG-174/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF
EFor 0 % to 99 % high voltage change
FNo condensation
Figure 1: DC linearity characteristics
Figure 2: Practical PMT DC output limits
TACCB0141EB
TACCB0140EB
120
20
PMT SUPPLY VOLTAGE: -1000 V
C13002-02
100
(reference)
330 kΩ / STAGE
RESISTIVE DIVIDER
80
10
C13002-01
60
C13002-01
C13002-02
40
20
0
0
-10
1
10
100
1000
-200
-400
-600
-800
-1000
-1200
-1400
-1600
PMT OUTPUT CURRENT (µA)
PMT SUPPLY VOLTAGE (V)
* Photomultiplier tube must be used with a supply voltage within the rated range.
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are
subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2017 Hamamatsu Photonics K.K.