BQ77216
BQ77216
www.ti.com
SLUSE36 – AUGUST 2020
SLUSE36 – AUGUST 2020
BQ77216 Voltage and Temperature Protection for 3-Series to 16-Series Cell Li-Ion
Batteries with Internal Delay Timer
1 Features
3 Description
•
•
3-series cell to 16-series cell protection
High-accuracy over voltage protection
– ± 10 mV at 25°C
– ± 20 mV from 0°C to 60°C
Overvoltage protection options from 3.55 V to 5.1
V
Undervoltage protection with options from 1.0 V to
3.5 V
Open-wire connection detection
Overtemperature protection
Random cell connection
The BQ77216 family of products provides a range of
voltage and temperature monitoring including
overvoltage (OVP), undervoltage (UVP), open wire
(OW), and overtemperature (OT) protection for li-ion
battery pack systems. Each cell is monitored
independently for overvoltage, undervoltage, and
open-wire conditions. With the addition of an external
NTC thermistor, the device can detect
•
•
overtemperature conditions.
•
•
•
•
•
•
•
In the BQ77216 device, an internal delay timer is
initiated upon detection of an overvoltage,
undervoltage, open-wire, or overtemperature
condition. Upon expiration of the delay timer, the
respective output is triggered into its active state
(either high or low, depending on the configuration).
Functional safety-capable
Fixed internal delay timers
Fixed detections thresholds
Fixed output drive type for each of COUT and
DOUT
– Active high or active low
– Active high drive to 6 V
– Open drain with ability to be pulled up
externally to VDD
The overvoltage triggers the COUT pin if a fault is
detected, and undervoltage triggers the DOUT pin if a
fault is detected. If an overtemperature or open-wire
fault is detected, then both the DOUT and COUT will
be triggered. For quicker production-line testing, the
BQ77216 device provides a Customer Test Mode
(CTM) with greatly reduced delay time.
•
•
•
Low power consumption ICC ≈ 1 µA
(VCELL(ALL) < VOV
)
Device Information Table
Low leakage current per cell input < 100 nA with
open wire detection disabled
Package footprint options:
PART NUMBER
PACKAGE
BODY SIZE (NOM)
4.40 mm x 7.80 mm
(6.40 mm x 7.80 mm,
including leads)
BQ7721600(1)
TSSOP (24)
– Leaded 24-pin TSSOP with 0.65-mm lead pitch
2 Applications
(1) Contact TI for more information.
PACK+
Fuse or
Back-to-Back FETs
•
Protection for li-ion battery packs used in:
– Handheld garden tools
CVD
– Handheld power tools
VDD
– Cordless vacuum cleaners
– UPS battery backup
RIN
V16
CIN
DOUT
– Light electric vehicles (eBike, eScooter, pedal
assist bicycles)
RIN
RIN
RIN
V3
CIN
V2
CIN
V1
CIN
VSS
RDOUT
GND
COUT
RCOUT
RNTC
TS
PACK-
GND
Simplified Schematic
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for preproduction products; subject to change
Copyright © 2020 Texas Instruments Incorporated
Submit Document Feedback
1
without notice.
Product Folder Links: BQ77216