ꢀ ꢁꢂ ꢃ ꢄ ꢅ ꢂ ꢆ ꢀꢁ ꢂꢃ ꢄꢅ ꢇ
SLUS553D − MAY 2003 − REVISED JULY 2005
Table 1. Available Options
SELECTOR OPERATION
CONDITION
−20°C ≤ T ≤ 125°C
bq24702PW
bq24703RHD
J
Battery as Power Source
Battery removal
Automatically selects ac + alarm
Selection based on selector inputs
Automatically selects ac + alarm
Adapter latched until adapter is removed or ac select
toggles.
Battery reinserted
AC as Power Source
AC removal
Automatically selects battery
Automatically selects battery
AC reinserted
Selection based on selector inputs
Selection based on selector inputs
Depleted Battery Condition
Automatically selects ac
Sends ALARM signal
Battery as power source Sends ALARM signal
AC as power source
Sends ALARM signal
Sends ALARM signal
ALARM Signal Active
Depleted battery condition
Depleted battery condition
When selector input is not equal to selector
output (single pulse alarm)
ABSOLUTE MAXIMUM RATINGS OVER OPERATING FREE-AIR TEMPERATURE
Ĕ}
(unless otherwise noted)
Supply voltage range: VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 30 V
Battery voltage range: SRP, SRN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 30 V
Input voltage: ACN, ACP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.3 V to 30 V
Virtual junction temperature range, T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to 125°C
J
Maximum source/sink current VHSP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Maximum ramp rate for V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V/ µs
CC
Maximum sink current ACPRES, COMP, ALARM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 mA
Maximum ramp rate for V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V/ µs
(BAT)
Maximum source/sink current BATDRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Maximum source/sink current ACDRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA
Maximum source/sink current PWM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Maximum source/sink current pulsed ACDRV, (10-µs rise time, 10-µs fall time, 1-ms pulse width, single pulse) 50 mA
Maximum source current VREF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Maximum source current SRP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA
Maximum difference voltage SRP − SRN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Storage temperature range T
Lead temperature (soldering, 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
stg
†
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
All voltages are with respect to ground. Currents are positive into and negative out of the specified terminals. Consult the Packaging section of
the data book for thermal limitations and considerations of the package.
3
www.ti.com
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
