bq24715
www.ti.com
SLUSBD1 –FEBRUARY 2013
2-3 Cell NVDC-1 Battery Charger Controller
with Ultra-Fast Transient Response and High Light-Load Efficiency
Check for Samples: bq24715
1
FEATURES
APPLICATIONS
•
6-24V Input SMBus NVDC-1 2-3S Battery
Charger Controller
•
•
•
Ultrabook, Notebook, and Tablet PC
Industrial and Medical Equipment
Portable Equipment
•
System Instant-on Operation with No Battery
or Deeply Discharged Battery
•
•
Ultra-Fast Transient Response of 100 µs
DESCRIPTION
The bq24715 is a NVDC-1 synchronous battery
charge controller with low quiescent current, high light
load efficiency for 2S or 3S Li-ion battery charging
applications, offering low component count.
Ultra-Low Quiescent Current of 500 µA and
High PFM Light Load Efficiency 80% at 20mA
load to Meet Energy Star and ErP Lot6
•
•
Switching Frequency: 600kHz/800kHz/1MHz
The power path management allows the system to be
regulated at battery voltage but does not drop below
the programmable system minimum voltage.
Programmable System/Charge Voltage (16
mV/step), Input/Charge Current (64 mA/step)
with High Accuracy
The bq24715 provides N-channel ACFET and RBFET
drivers for the power path management. It also
provides driver of the external P-channel battery FET.
The loop compensation is fully integrated.
–
–
–
±0.5% Charge Voltage Regulation
±3% Input/Charge Current Regulation
±2% 40x Input/16x Discharge Current
Monitor Output
The bq24715 has programmable 11-bit charge
voltage, 7-bit input/charge current and 6-bit minimal
system voltage with very high regulation accuracies
through the SMBus communication interface.
•
•
Support Battery LEARN Function
Maximize CPU Performance with Deeply
Discharged Battery or No Battery
•
•
Integrated NMOS ACFET and RBFET Driver
20-pin 3.5 x 3.5 mm2 QFN Package
The bq24715 monitors adapter current or battery
discharge current through the IOUT pin allowing the
host to throttle down CPU speed when needed.
The bq24715 provides extensive safety features for
over current, over voltage and MOSFET short circuit.
Simplified Application Diagram
Ultra-Low Quiescent
Current
Ultra-Fast
DPM
Support CPU Turbo Mode
To System
Adaptor
6-24V
Iin
Enhanced Safety
Features
OCP, OVP,
FET Short
Optional
N-FET
Driver
bq24715
Adaptor Detection
Ichg
PMOS BAT
FET Driver
NVDC-1
Charger
Controller
SMBus Controls V and I
with High Accuracy
SMBus
2S-3S
HOST
Iin, Idischarge
Integrated Compensation Internal Soft Start
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCT PREVIEW information concerns products in the
formative or design phase of development. Characteristic data and
other specifications are design goals. Texas Instruments reserves
the right to change or discontinue these products without notice.
Copyright © 2013, Texas Instruments Incorporated