Datasheet
2.7 V to 36 V Input, 2 A
SingleBuckDC/DCConverterwithBoostFunction
For Automotive
BD8P250MUF-C
General Description
Key Specifications
BD8P250MUF-C is a synchronous rectification buck DC/DC
converter with a boost control function. This DC/DC
converter enables a common design that can meet a variety
of demands, including the use as a buck DC/DC converter if
a drop of the output voltage is acceptable during the input
voltage drop such as a cold cranking, and the use as a
buck-boost DC/DC with an exclusive boost-FET connected
if the output voltage must be maintained. The Quick Buck
Booster® technology realizes a high-speed response even
during buck-boost operations, allowing reduction in the
capacitance value of the output capacitor.
Input Voltage A:
3.5 V to 36 V
(Buck DC/DC Converter, Initial startup is over 4.8 V)
Input Voltage B:
(Buck-Boost DC/DC Converter, Initial startup is over 7.5 V)
Output Voltage:
Output Current in Buck Operation:
Output Current in Buck-Boost Operation: 0.8 A(Max)
Switching Frequency:
Shutdown Circuit Current:
Quiescent Current:
2.7 V to 36 V
5.0 V(Typ)
2 A(Max)
2.2 MHz(Typ)
3.5 µA(Typ)
8 µA(Typ)
-40 °C to +125 °C
Operating Temperature:
Features
Package
W(Typ) x D(Typ) x H(Max)
4.00 mm x 4.00 mm x 1.00 mm
Quick Buck Booster®
VQFN24FV4040
Nano Pulse Control™
AEC-Q100 Qualitied (Note 1)
Boost Control Function
LLM(Light Load Mode)
Spread Spectrum Function
Power Good Function
Soft Start Function
Current Mode Control
Enlarged View
Phase Compensation Included
Over Current Protection
Input Under Voltage Lockout Protection
Thermal Shutdown Protection
Output Over Voltage Protection
Short Circuit Protection
VQFN24FV4040
Wettable Flank Package
Wettable Flank QFN Package
(Note 1) Grade 1
Applications
Automotive Equipment
(Cluster Panel, Infotainment Systems)
Other Electronic Equipment
Typical Application Circuit
BD8P250MUF-C
CBOOT
BD8P250MUF-C
CBOOT
Exclusive Boost-FET
BD90302NUF-C
VIN
VIN
VIN
BOOT
VIN
BOOT
L1
L1
VOUT
VOUT
SW
SW
SW2 PVOUT
CTLIN
PVIN
EN
PVIN
EN
VOUT
VOUT
CIN
CIN
COUT
VCC_EX
VCC_EX
PGND
COUT
VMODE
RCTL
MODE
SSCG
VMODE
MODE
SSCG
CTLOUT
PGOOD
VREG
CTLOUT
PGOOD
VREG
RPGOOD
RPGOOD
GND PGND
GND PGND
CREG
CREG
A. Buck DC/DC Converter
B. Buck-Boost DC/DC Converter (Use Exclusive Boost-FET)
Figure 1. Application Circuit
Quick Buck Booster® is a registered trademark of ROHM Co., Ltd.
Nano Pulse Control™ is a trademark of ROHM Co., Ltd.
〇Product structure : Silicon integrated circuit 〇This product has no designed protection against radioactive rays
www.rohm.com
© 2018 ROHM Co., Ltd. All rights reserved.
TSZ22111 • 14 • 001
TSZ02201-0J1J0AL01400-1-2
11.Sep.2018 Rev.001
1/42