System Power Supply ICs for CCD Camera of Mobile Phones
Power Supply
for CCD Camera Module
BD6039GU
No.10033EAT02
●Description
BD6039GU is system power supply LSI for CCD camera that supplies all voltage sources for CCD camera.
This IC has Step up DC/DC converter and LDO for CCD sensor, Inverted DC/DC converter for CCD sensor, and LDO (7ch).
REGA, REG1, REG8, REG5 can be connected the power supply independent from VBAT.
Each output voltage has an adjustable by the register, and this IC can correspond to various CCD modules.
A necessary power supply for CCD camera system is integrated into 1chip, and it contributes to space saving.
BD6039GU achieves compact size with the chip size package.
●Features
1) The BD6039GU is equipped with all voltage sources for CCD camera system.
2) Each output has an adjustable voltage; hence this IC can correspond to various CCD modules.
3) The BD6039GU is controlled by I2C BUS format.
4) The BD6039GU employs 4.8mm2 chip size package, so this IC achieves compact size.
●Functions
1) Step up DC/DC converter and LDO for CCD sensor (+15V/+14.5V/+13V)
2) Inverted DC/DC converter for CCD sensor (-8V/-7.5V/-7V)
3) 7ch Series Regulator
REG1 : 1.2V, Iomax=210mA
REG2 : 3.0V, Iomax=50mA
REG5 : 1.5V/1.8V, Iomax=100mA
REG6 : 3.2V/3.3V, Iomax=260mA
REG7 : 3.0V/3.3V, Iomax=50mA
REG8 : 1.5V/1.8V, Iomax=100mA
REGA : 1.5V/1.8V, Iomax=100mA
4) Correspondence to I2C BUS format
5) Thermal shutdown (Auto-return type)
6) VCSP85H4 chip size package (1.0mm max)
●Absolute Maximum Ratings(Ta=25℃)
Parameter
Maximum Applied voltage 1
Maximum Applied voltage 2
Maximum Applied voltage 3
Maximum Applied voltage 4
Power Dissipation
Symbol
VMAX1
VMAX2
VMAX3
VMAX4
Pd
Ratings
Unit
V
(Note 1)
(Note 2)
(Note 3)
(Note 4)
(Note 5)
20
18
V
-13.5
V
6
V
2110
mW
℃
℃
Operating Temperature Range
Storage Temperature Range
Topr
-30 ~ +85
-55 ~ +150
Tstg
(Note 1) SWP, VPLUS1, VPLUS2 pin
(Note 2) VDD3 pin
(Note 3) VDD4, SWN pin
(Note 4) Except Note1~Note3 pin
(Note 5) Power dissipation deleting is 16.9mW/ ℃, when it’s used in over 25℃.
(It’s deleting is on the board that is ROHM’s standard)
●Recommended Operating Conditions (VBAT≥VIO, Ta=-30~85 ℃)
Parameter
VBAT input voltage
VIO pin voltage
Symbol
VBAT
VIO
Limits
Unit
V
2.7 ~ 5.5
1.65 ~ 3.3
V
www.rohm.com
© 2010 ROHM Co., Ltd. All rights reserved.
2010.03 - Rev.A
1/24