Datasheet
BD48xxx series BD49xxx series
●Electrical Characteristics (Unless Otherwise Specified, Ta=-40 to 105°C) - continued
Limit
Parameter
Symbol
VOL
Condition
Unit
Min.
Typ.
Max.
VDD=1.5V, ISINK = 0.4 mA, VDET=2.3-6.0V
VDD=2.4V, ISINK = 2.0 mA, VDET=2.7-6.0V
-
-
-
-
-
-
-
0.5
‘Low’Output Voltage (Nch)
V
V
0.5
VDD=4.8V, ISOURCE=0.7 mA, VDET(2.3V to 4.2V) VDD-0.5
VDD=6.0V, ISOURCE=0.9 mA,VDET(4.3V to 5.2V) VDD-0.5
VDD=8.0V, ISOURCE=1.1 mA,VDET(5.3V to 6.0V) VDD-0.5
-
-
-
‘High’Output Voltage (Pch)
(BD49Exxx Series)
VOH
Leak Current when OFF
(BD48xxx Series)
*1
Ileak
VDD=VDS=10V
-
-
-
0.1
µA
Detection Voltage
Ta=-40°C to 105°C
VDET/∆T
±100
±360
ppm/°C
V
Temperature coefficient
(Designed Guarantee)
Hysteresis Voltage
∆VDET VDD=L‰H‰L, RL=470kΩ
VDET×0.03 VDET×0.05 VDET×0.08
VDET(T) : Standard Detection Voltage(2.3V to 6.0V, 0.1V step)
RL: Pull-up resistor to be connected between VOUT and power supply.
CL: Capacitor to be connected between VOUT and GND.
Design Guarantee. (Outgoing inspection is not done on all products.)
*1 Guaranteed at Ta=25°C.
www.rohm.com
TSZ02201-0R7R0G300030-1-2
22.May.2013.Rev.008
© 2013 ROHM Co., Ltd. All rights reserved.
7/15
TSZ22111・15・001