Managed Industrial Ethernet Switches
8, 10, 16, 18 port Ethernet Switches
Models SE408-T, SEC410-2SFP-T, SE416-T, SEC418-2SFP-T
www.advantech-bb.com
Features & Benefits
• 8-port or 16-port 10/100 Mbps
• 8-port or 16-port 10/100 Mbps + 2-port Gigabit Combo (RJ45 or SFP) Uplink
• Layer 2 Managed functionality and advanced diagnostic tools
• Support IGMP snooping to forward and filter multicast traffic intelligently
• Support RSTP standard redundancy protocol to integrate into standard system
• Energy Efficient Ethernet (EEE), IEEE 802.3az for low energy consumption
• IXM™ function enables the cross management for fast deployment
• X-Ring Elite™ function offers self-healing recovery time less than 20 ms
• Redundant Power Inputs (8.4 - 57.6 VDC)
SE408-T
SEC410-2SFP-T
SE416-T
SEC418-2SFP-T
• Wide operating temperature range -40 to +75°C
• UL508 certified for Industrial Control Panel
• UL C1D2, ATEX Zone 2 and IECEx certified for Hazardous Environments
Essential L2 Managed Features in Automation
IEEE802.3az – Energy-Efficient Ethernet (EEE) is a set of enhancements
to the twisted-pair and backplane Ethernet family of computer networking
standards that allows for less power consumption during periods of low data
activity.
IXM™ – Offers auto synchronization function of both firmware and configuration
settings to make middle/large-scale deployment of multiple switches fast and
easy. A built- in Web GUI feature, no need for extra software to be installed on
a computer.
Introduction
The SE400 series is a managed Ethernet switch with industrial, ruggedized features
designed to work in harsh, wide temperature environment applications. This switch
offers all the features expected in a managed switch such as VLAN, IGMP Snooping,
Network Redundancy, Link Aggregation, SNMP V1,V2c,V3 and Web Management.
Comprehensive network security features such as 802.1x, DoS prevention, Multiple
account setting, Storm control, SNMPv3 (Encryption)and Radius are also offered.
Embedded into each switch is the industry leading eWorx IXM™ cross management
technology. IXM allows the installer to auto synchronize firmware updates and
push configuration settings to either individual or groups of switches. IXM provides
maintenance and provisioning functionality to both the SE400 and SE500 family
switches without the need of extra software or trained personal. IXM™ speeds up switch
deployment and ensures network stability.
RSTP/STP – IEEE standard self-healing/ring recovery technology. Reduce
redundant network cabling and planning costs and ensure high reliability of
your industrial network applications.
Multiple Account Access – This feature allows the network manager to
create user accounts with differing permissions. User ID’s can be created with
a wide variety of access - from simple device monitoring to full maintenance
accessibility, thus ensuring security and offering flexibility for field deployment.
IGMP Snooping v1/v2/v3 – The Internet Group Management Protocol is
a feature that allows the managed switch to forward and filter multicast traffic
intelligently, designed for the video streaming and automation control network
applications.
The eWorx SE400 series switches feature a powerful suite of diagnostic, monitoring
and network performance capabilities: Cable diagnostics, IPv4/IPv6 ping, fiber SFP
monitoring (DDMI), port utilization, traffic statistics, QoS and rate limiting - all available
from the Web GUI. These advanced features offer quick and easy troubleshooting.
VLAN - Virtual Local Area Network allows you to segment the different network
domains in a switch, also isolate the different network group as security
consideration.
QoS - Quality of Service provides the network packet prioritization in order
to provide better network service. The main goal of QoS is to improve the
latency of prioritized Ethernet packets required for time-sensitive and real-time
interactive applications in automation.
Cable Diagnostics – This feature will enable you to verify the length of a
cable right from the switch to the other end. This is essential in diagnosing
faults as a break in the cable can be easily identified on a single wire within the
cable, as well as shorts and crossed-pairs.
IPv6 – A future-proof feature, IPv6 (Internet Protocol version 6) is a set of
specifications from the Internet Engineering Task Force (IETF) that is an
upgrade of existing IP version 4 (IPv4). The basics of IPv6 are similar to those
of IPv4 - devices can use IPv6 as source and destination addresses to pass
packets over a network.
Specifications
COMMUNICATIONS
IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3z, 802.1p, 802.3az, 802.1w,
802.1Q, 802.1X, 802.1ad
Standards
10/100 Base-T(X), Optional 100Base-FX,
1000Base-SX/LX/LHX/XD/ZX/EZX
LAN
Transmission Ethernet: 100m (4-wire Cat.5e, Cat.6 RJ-45 cable suggested for GB port) SFP:
Distance
110km (depends on SFP)
Ethernet: 10/100Mbps Auto-Negotiation
Gigabit Copper: 10/100/1000 Mbps, Auto-Negotiation
Gigabit Fiber: Up to 1000Mbps
Transmission
Speed
INTERFACE
Connectors
Ethernet
8 x RJ45 / 16 x RJ45 - SE408-T / SE416-T
8 x RJ45 / 16 x RJ45 + 2 x (RJ45/SFP) combo ports - SEC410-2SFP-T /
SEC418-2SFP-T
1 x Reset button
6-pin removable screw terminal (power & relay)
Auto Sensing, 10/100BaseTX, 10/100/1000BaseTX, Duplex and MDIX
PWR1, PWR2, SYS, Alarm and R.M.
Ease of Use – 10/100BaseTX or 10/100/1000 Mbps ports are auto sensing
and auto configuring. Each copper port is automatically negotiated for
maximum speed and performance by default, but can also be configured
individually via the user interface. A powerful inside processor allows wire
LED Indicators 10/100 T(X): Link/Activity, Speed Gigabit Copper: Link/Activity, Speed SFP: Link/
Activity
speed capability on all.
All product specifications are subject to change without notice.
SE400 ManagedSwitches-WideTemp_1017
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445