Modular Protocol-Independent,
10 Gbps XFP Fiber Mode Converters
iMcV-10G Converter XFP series
www.advantech-bb.com
PRODUCT FEATURES
•
Interchangeable XFP modules allow for multiple fiber mode/type conversion
options (single-mode, multi-mode) as well as support for copper XFPs
DDMI capable XFPs are supported through SNMP when installed in a
compatible managed chassis
•
•
•
Supports 3R’s signal regeneration - Reamplify, Reshape, Retime
Supports a wide range of XFP modules with transmission speeds from
9.9 Gbps to 11.3 Gbps
•
•
User selectable FX LinkLoss enables the operator to identify a cable
fault/failure when the unit is not used in a managed chassis
Supports Config Control, a feature that retains the latest configuration of a
module regardless of how the initial configuration was set up; whether by DIP
switch or SNMP Management Module
•
Supports XFP Loopback (Lineside & SFI) and Loss Carry Forward
(XFP dependent)
The iMcV-10G-Converter is a dual-wide SNMP manageable module that
allows network operators to convert multiple fiber types and wavelengths,
as well as copper XFPs, within a network. It installs in the modular, SNMP-
manageable iMediaChassis series and in the unmanaged MediaChassis
series (available rom Advantech B+B SmartWorx).
ORDERING INFORMATION
MODEL NUMBER
IE-iMcV-10G-Converter XFP/XFP*
860-12100 SFP
FIBER
FIBER PORTS
RANGE
2
Various
ORDERING INFORMATION
The iMcV-10G-Converter uses 10 Gbps XFP modules that are capable of
moving large amounts of data over long distances, for applications such
as ISPs, data storage,fiber channel and others. The hot-swappable nature
of XFPs and the numerous fiber modes and types that are available allow
for easy configuration and future upgrading as network demands evolve.
FIBER
MODEL NUMBER
FIBER
RANGE
BUDGET
(DB)
IE-XFP Modules: 10 Gbps Ethernet (OC-192) with DDMI
808-38610
808-38611
808-38612
808-38613
IE-XFP SR/10G-ED, MM850, LC
IE-XFP LR/10G-ED, SM1310, LC
IE-XFP ER/10G-ED, SM1550, LC
IE-XFP ZR/10G-ED, SM1550/PLUS, LC
33 m
10 km
40 km
80 km
2.8 dB
8.4 dB
15 dB
23 dB
The iMcV-10G-Converter is protocol-independent with dual XFP ports that
can provide a single conversion between copper, different wavelengths
or single-mode and multi-mode fiber, single-mode to single-mode fiber or
multi-mode to single-strand single-mode fiber. The iMcV-10G-Converter
module supports a variety of user-configurable features such as LinkLoss,
LoopBack and variable speed XFPs.
* SFP fibers sold separately - available at www.advantech-bb.com
Easily configure and manage converters with the GUI-based iView².
As an SNMP management application, iView² gives network managers
the ability to monitor and control B+B SmartWorx’ products. iView² runs as
a Web Server version and is a free software, available for download from
the website.
iView: Webserver Version
Free Download
All product specifications are subject to change without notice.
iMcV-10G_FiberModeConverters-XFP_4417ds
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445