5秒后页面跳转
BA4424 PDF预览

BA4424

更新时间: 2024-02-02 07:59:14
品牌 Logo 应用领域
罗姆 - ROHM 电视
页数 文件大小 规格书
7页 110K
描述
FM / TV front end

BA4424 技术参数

是否无铅: 不含铅是否Rohs认证: 符合
生命周期:Active零件包装代码:SIP
包装说明:SIP-9针数:9
Reach Compliance Code:compliantECCN代码:EAR99
HTS代码:8542.39.00.01风险等级:5.69
内置中频放大器:NO商用集成电路类型:AUDIO TUNER
JESD-30 代码:R-PSIP-T9JESD-609代码:e3/e2
长度:21.8 mm频带数量:1
功能数量:1端子数量:9
封装主体材料:PLASTIC/EPOXY封装代码:SIP
封装形状:RECTANGULAR封装形式:IN-LINE
峰值回流温度(摄氏度):260认证状态:Not Qualified
座面最大高度:7.2 mm最大供电电压 (Vsup):6 V
最小供电电压 (Vsup):1.7 V表面贴装:NO
端子面层:TIN/TIN COPPER端子形式:THROUGH-HOLE
端子节距:2.54 mm端子位置:SINGLE
处于峰值回流温度下的最长时间:10宽度:2.8 mm
Base Number Matches:1

BA4424 数据手册

 浏览型号BA4424的Datasheet PDF文件第1页浏览型号BA4424的Datasheet PDF文件第2页浏览型号BA4424的Datasheet PDF文件第3页浏览型号BA4424的Datasheet PDF文件第4页浏览型号BA4424的Datasheet PDF文件第6页浏览型号BA4424的Datasheet PDF文件第7页 
Audio ICs  
BA4424N  
FOperation notes  
(1) Application circuit  
(4) Mixer load  
The example application circuit is the one which we rec-  
ommend, however, when using it, verify characteristics  
carefully.  
In addition to an IFT, a resistive load can also be used for  
the mixer output load. However, take care in this case as  
the gain and intermodulation characteristics will be af-  
fected.  
If external circuit values are changed, set them with suffi-  
cient margin to allow for deviations of both the Rohm IC  
and external components in the quiescent and transient  
characteristics. Also, please note that we have not com-  
pletely verified any possible patent issues which the ap-  
plication circuit may involve.  
(5) Local oscillation circuit  
To reduce spurious radiation, the oscillation level at Pin  
8 (OSC) can be adjusted. This is done by adding a resis-  
tor (several to several tens of ) between Pin 8 and the  
tank circuit. However, when setting the value, take care  
regarding the oscillation margin as related to the tank cir-  
cuit Q damp.  
(2) Operating power supply voltage range  
As long as the operating power supply voltage range is  
not exceeded, the circuit functions are guaranteed within  
the ambient operating temperature. Although we cannot  
guarantee that the electrical characteristic values rated  
under the rating conditions will be obtained, there will be  
no abrupt changes in the characteristics within this  
range.  
(6) IF buffer amplifier  
If the buffer amplifier pin is connected to another circuit  
to use the buffer amplifier pin’s voltage, take care that a  
reverse voltage never appears at the pin.  
(7) Power supply RC filter  
Do not insert a resistor between the VCC pin (Pin 9) and  
the MIX OUT pins (Pins 3 and 4), as a resistor inserted  
in the power supply line will decrease sensitivity due to  
the drop in the voltage. Regarding the resistor between  
Pin 9 and the RFout pin (Pin 3), set the value so that the  
voltage at Pin 3 is not lower than the voltage at Pin 2.  
(3) RF amplifier  
A band pass filter (BPF) is used in the ANT circuit, and  
as the RF amplifier is base-grounded, a BPF with an out-  
put impedance of 75must be used. If a BPF without DC  
cutoff is used, a coupling capacitor will be necessary.  
Connect the bypass capacitor to the ground connection  
of the input BPF. The pattern connecting these should be  
such that supply current will absolutely not flow from Pin  
5 (the ground line should be laid in the same fashion as  
shown in the measurement circuit schematic).  
52  

与BA4424相关器件

型号 品牌 描述 获取价格 数据表
BA4424N ROHM FM / TV front end

获取价格

BA4424N-DX ROHM Audio Tuner, 1-Band, PSIP9, SIP-9

获取价格

BA4425 ROHM FM / TV front end

获取价格

BA4425F ROHM FM / TV front end

获取价格

BA4425F-DX ROHM Audio Tuner, 1-Band, PDSO8, SOP-8

获取价格

BA4425F-DXE1 ROHM Audio Tuner, 1-Band, PDSO8, SOP-8

获取价格