BA10358xx, BA10324Axx, BA2904xxx, BA2904Sxxx, BA2904Wxx
BA2902xx, BA2902Sxx
Datasheet
Absolute Maximum Ratings (TA=25°C)
○BA2904, BA2902
Ratings
BA2904, BA2904W
BA2902
Parameter
Supply Voltage
Symbol
Unit
V
BA2904S
BA2902S
VCC-VEE
SOP8
+36
775(Note 10,15)
625(Note 11,15)
600(Note 12,15)
560(Note 13,15)
870(Note 14,15)
+36
SSOP-B8
Power dissipation
PD
MSOP8
SOP14
SSOP-B14
VID
mW
Differential Input Voltage(Note 16)
Input Common-mode Voltage Range
Input Current(Note 17)
V
V
VICM
(VEE-0.3) to (VEE+36)
-10
II
mA
V
Vopr
Wide Operating Supply Voltage
Operating Temperature Range
Storage Temperature Range
Maximum Junction Temperature
+3.0 to +36.0
Topr
-40 to +105
-40 to +125
°C
°C
°C
Tstg
-55 to +150
+150
TJmax
(Note 10) To use at temperature above TA=25°C reduce 6.2mW.
(Note 11) To use at temperature above TA=25°C reduce 5.0mW.
(Note 12) To use at temperature above TA=25°C reduce 4.8mW.
(Note 13) To use at temperature above TA=25°C reduce 4.5mW.
(Note 14) To use at temperature above TA=25°C reduce 7.0mW.
(Note 15) Mounted on a FR4 glass epoxy PCB 70mm×70mm×1.6mm (Copper foil area less than 3%).
(Note 16) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
(Note 17) An excessive input current will flow when input voltages of less than VEE-0.6V are applied.
The input current can be set to less than the rated current by adding a limiting resistor.
Caution: Operating the IC over the absolute maximum ratings may damage the IC. The damage can either be a short circuit between pins or an open circuit
between pins and the internal circuitry. Therefore, it is important to consider circuit protection measures, such as adding a fuse, in case the IC is operated
over the absolute maximum ratings.
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
TSZ22111・15・001
TSZ02201-0RAR0G200130-1-2
23.Jan.2014 Rev.003
5/52