RF chokes
B78108T, B78148T
MCC series, 3.3 × 7 (mm)
Technical data and measuring conditions
Rated inductance LR
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
Measuring frequency:
LR ≤ 10 µH
=
1 MHz
10 µH < LR ≤ 4700 µH = 100 kHz
≤ 1 mA
Measuring current:
Measuring temperature: 20 °C
Q factor Qmin
Measured with precision impedance analyzer Agilent 4294A, 20 °C
40 °C
Rated temperature TR
Rated current IR
Maximum permissible DC current at rated temperature
≤ 10% (referred to initial value) at IR, 20 °C
Measured at 20 °C
Inductance decrease ∆L/L0
DC resistance Rmax
Resonance frequency fres,min Measured with Agilent 4294A or 8753ES, 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (3 ±0.3) s
Wetting of soldering area ≥ 90%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat (260 ±5) °C, 10 s (to IEC 60068-2-20, test Tb)
Tensile strength of leads
Climatic category
≥ 20 N (to IEC 60068-2-21, test Ua)
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 0.25 g
Mounting information
When bending the leads, take care that the start-of-winding areas at the face ends (protected by
glue and lacquer) are not subjected to any mechanical stress.
Please read Cautions and warnings and
Important notes at the end of this document.
4
03/08