Datasheet > B3S-1100P

B3S-1100P

更新时间： 2024-01-18 09:10:45

品牌	Logo	应用领域
欧姆龙 - OMRON		开关机械
页数	文件大小	规格书
5页	52K
描述
Mechanical Key Switch (SMD)

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

B3S-1100P 技术参数

是否无铅：	不含铅	是否Rohs认证：	符合
生命周期：	Active	包装说明：	ROHS COMPLIANT
Reach Compliance Code：	unknown	ECCN代码：	EAR99
HTS代码：	8536.50.90.40	风险等级：	1.79
Samacsys Description：	Button Tactile Switch, SPST-NO 50 mA @ 24 V dc 0.8mm	执行器角度：
执行器长度：	0.026 inch	执行器行程：	0.254 mm
执行器类型：	PLUNGER TYPE	其他特性：	BAGS, WITH GROUND TERMINALS
主体宽度：	6 mm	主体高度：	3.5 mm
主体长度或直径：	6.6 mm	喷头长度：
电路配置：	1X1	最长触点回跳时间：	5 ms
最大触点电流（直流）：	0.05 A	触点（直流）最大额定R负载：	.05A@24VDC
触点功能：	ON-OFF	触点电阻：	0.1 m Ω
触点时间：	BREAK-BEFORE-MAKE	最大触点电压（直流）：	24 V
介质耐电压：	500VAC V	电气寿命：	500000 Cycle(s)
绝缘电阻：	100000000 Ω	安装特点：	SURFACE MOUNT-STRAIGHT
开关数量：	1	最大操作力：	1.57 N
最高工作温度：	70 °C	最低工作温度：	-25 °C
包装方法：	BAG	密封：	IP67
表面贴装：	NO	开关动作：	MOMENTARY-TACTILE
开关功能：	SPST	开关类型：	KEYPAD SWITCH
端接类型：	SOLDER

B3S-1100P 数据手册

B3S

Dimensions

Note: All units are in millimeters unless otherwise indicated.

Without Ground Terminal

PCB Mounting

(Top View)

Terminal Arrangement

/Internal Connections

(Top View)

B3S-1000

B3S-1002

3.3

dia.

With Ground Terminal

B3S-1100

B3S-1102

PCB Mounting

(Top View)

Terminal Arrangement

/Internal Connections

(Top View)

3.3

dia.

Precautions

Reflow Soldering

Attach a thermocouple to one side of the terminal with high-temper

Do not apply additional force to the plunger once it has stopped

moving.

ature solder and use the thermocouple to set the reflow oven to a

peak terminal temperature of 230°±5°C. The optimum heating

Do not repeatedly press the plunger off-center or from an acute

angle.

curve is shown below

B3S Switches are designed to allow submersed washing after sol

dering. When washing, follow the guidelines given below:

10 s max.

1. Clean with alcohol solvents. Do not use chlorine solvents or

water.

2. When using ultrasonic cleaning in two- or three-tank systems

and do not clean for more than one minute at a time or for

more than three minutes total.

1 to 4°C/s

3. Do not apply external force to the Switch while washing.

4. Do not wash immediately after soldering. If possible, allow

components to stand for at least three minutes before

washing.

1 to 5°C/s

5. The Switch cannot be used where subject to direct contact

with water

Normal

temperature

60 to 90 s

20 s

30 s

max.

Time (s)

Note: The above heating curve applies if the

thickness of the circuit board is 1.6 mm.

1 2 345

下载PDF

与B3S-1100P相关器件

型号	品牌	描述	获取价格	数据表
B3S-1102	OMRON	Mechanical Key Switch (SMD)	获取价格
B3S-1102P	OMRON	Mechanical Key Switch (SMD)	获取价格
B3SARO	ETC	SWITCH HEAD 22.5MM KEY 2WAY	获取价格
B3SARRO	ETC	SWITCH HEAD 22.5MM KEY 3WAY	获取价格
B3SE	OMRON	Sealed Types	获取价格
B3SL	OMRON	Middle Stroke Tactile Switch	获取价格