Datasheet > B39871B4316P810

B39871B4316P810

更新时间： 2024-02-10 12:03:55

品牌	Logo	应用领域
东电化 - TDK		LTE
页数	文件大小	规格书
9页	136K
描述
SAW filter

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

B39871B4316P810 技术参数

是否Rohs认证：	符合	生命周期：	Contact Manufacturer
Reach Compliance Code：	compliant	Factory Lead Time：	9 weeks
风险等级：	3.7	中心频率或截止频率 (fo/fc)：	869 MHz
滤波器类型：	SAW FILTER	高度：	0.4 mm
输入阻抗：	50 OHM	最大插入损耗：	2.9 dB
长度：	1.4 mm	安装类型：	SURFACE MOUNT
功能数量：	1	最高工作温度：	85 °C
最低工作温度：	-40 °C	输出阻抗：	50 OHM Ω
物理尺寸：	L1.4XB1.1XH0.4 (mm)/L0.055XB0.043XH0.016 (inch)	宽度：	1.1 mm
Base Number Matches：	1

B39871B4316P810 数据手册

SAW Components

SAW filter

B4316

869.0 MHz

Data sheet

ESD protection of SAW filters

SAW filters are Electro Static Discharge sensitive devices. To reduce the probability of damages

caused by ESD, special matching topologies have to be applied.

In general, “ESD matching” has to be ensured at that filter port, where electrostatic discharge is

expected.

Electrostatic discharges predominantly appear at the antenna input of RF receivers. Therefore

only the input matching of the SAW filter has to be designed to short circuit or to block the ESD

pulse.

Below three figures show recommended “ESD matching” topologies.

For wideband filters the high-pass ESD matching structure needs to be at least of 3^rdorder to

ensure a proper matching for any impedance value of antenna and SAW filter input. The required

component values have to be determined from case to case.

Cs1

Cs3

Cs1

Cs3

to output

matching

to output

matching

Lp2

Fig. 1 MLC varistor plus ESD matching

Fig. 2 Suppressor diode plus ESD matching

In cases where minor ESD occur, following simplified “ESD matching” topologies can be used

alternatively.

Cs1

Cs3

to output

matching

Lp2

Fig. 3 3^rdorder high-pass structure for basic ESD protection

In all three figures the shunt inductor Lp2 could be replaced by a shorted microstrip with proper

length and width. If this configuration is possible depends on the operating frequency and

available pcb space.

Effectiveness of the applied ESD protection has to be checked according to relevant industry

standards or customer specific requirements

For further information, please refer to EPCOS Application report:

“ESD protection for SAW filters”.

This report can be found under www.epcos.com/rke.Click on “Applications Notes”.

Please read cautions and warnings and

important notes at the end of this document.

March 02, 2012

1...4 5 678 9

下载PDF

与B39871B4316P810相关器件

型号	品牌	描述	获取价格	数据表
B39871B5059U410	EPCOS	SAW Tx filter CDMA 800	获取价格
B39871B9894P810	TDK	SAW Rx filter	获取价格
B39871R1950A310	TDK	SAW resonator	获取价格
B39871-R2709-U310	EPCOS	SAW Components Resonator	获取价格
B39871R2711U310	EPCOS	SAW Components SAW resonator Short range devices	获取价格
B39871R808H210	EPCOS	SAW Components SAW resonator Short range devices	获取价格