Datasheet > B39162B4313P810

B39162B4313P810

更新时间： 2022-04-08 06:46:28

品牌	Logo	应用领域
爱普科斯 - EPCOS		/
页数	文件大小	规格书
8页	76K
描述
Low insertion attenuation

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

B39162B4313P810 数据手册

SAW Components

SAW RF filter

Data sheet

B4313

1588.655 MHz

ESD protection of SAW filters

SAW filters are Electro Static Discharge sensitive devices. To reduce the probability of damages

caused by ESD, special matching topologies have to be applied.

In general, “ESD matching” has to be ensured at that filter port, where electrostatic discharge is

expected.

Electrostatic discharges predominantly appear at the antenna input of RF receivers. Therefore

only the input matching of the SAW filter has to be designed to short circuit or to block the ESD

pulse.

Below three figures show recommended “ESD matching” topologies.

For wideband filters the high-pass ESD matching structure needs to be at least of 3^rdorder to

ensure a proper matching for any impedance value of antenna and SAW filter input. The required

component values have to be determined from case to case.

Cs1

Cs3

Cs1

Cs3

to output

matching

to output

matching

Lp2

Fig. 1 MLC varistor plus ESD matching

Fig. 2 Suppressor diode plus ESD matching

In cases where minor ESD occur, following simplified “ESD matching” topologies can be used

alternatively.

Cs1

Cs3

to output

matching

Lp2

Fig. 3 3^rdorder high-pass structure for basic ESD protection

In all three figures the shunt inductor Lp2 could be replaced by a shorted microstrip with proper

length and width. If this configuration is possible depends on the operating frequency and

available pcb space.

Effectiveness of the applied ESD protection has to be checked according to relevant industry

standards or customer specific requirements

For further information, please refer to EPCOS Application report:

“ESD protection for SAW filters”.

This report can be found under www.epcos.com/rke.Click on “Applications Notes”.

Please read cautions and warnings and

important notes at the end of this document.

April 10, 2012

1 2 3 456 7 8

下载PDF

与B39162B4313P810相关器件

型号	品牌	描述	获取价格	数据表
B39162B4322P810	TDK	SAW Components GPS/GLONASS Extractor	获取价格
B39162B4327P810	EPCOS	SAW FILTER	获取价格
B39162-B7708-C510	EPCOS	SAW Filter, 1 Function(s), 1575.42MHz	获取价格
B39162-B7708-K710	EPCOS	SAW Components Low Loss Filter 1575,42 MHz	获取价格
B39162-B7722-C510	TDK	SAW Filter, 4 Pin(s), Ceramic,	获取价格
B39162-B7722-K710	EPCOS	SAW Components Low-Loss Filter 1575,42 MHz	获取价格