AZ7671
10 AMP SUBMINIATURE
POWER RELAY
FEATURES
• Small footprint
• Low cost
GENERAL DATA
• Epoxy sealed version available
• 10 Amp switching
• UL, CUR E44211
• TuV pending
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 5 A 240 VAC Res.
Operate Time (typical) 8 ms at nominal coil voltage
CONTACTS
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Dielectric Strength
4000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Ratings
Resistive load:
Max. switched power: 150 W
1250 VA
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Max. switched current: 10 A
Operating
-40°C (-40°F) to 70°C (158°F), standard
Storage
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–50 Hz
100g for 11ms 1/2 sine pulse
P.B.T. polyester
Max. switched voltage:30 VDC or 277 VAC
Vibration
*Note: If switching voltage is greater than 30VDC, special
precautions must be taken. Please contact the factory.
Shock
Enclosure
Rated Load
UL, CUR
5A at 250 VAC
10A at 125 VAC
4.2 A at 277 VAC
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
1/4 HP at 120/240/277 VAC
Max. Immersion Time 30 seconds
TV - 5 at 120 VAC
Pilot Duty at
24 VA, 24 VAC
Weight
6 grams
125 VA at 120/240/277 VAC
C150 at 120 VAC
COIL
Power
TUV
5A at 250 VAC
5A at 28 VDC
At Pickup Voltage
(typical)
253 mW standard
113 mW sensitive
Max. Continuous
Dissipation
1.25 W at 20°C (68°F) ambient
Temperature Rise
41°C (74°F) at nominal coil voltage, standard
22°C (40°F) at nominal coil voltage, sensitive
Material
silver nickel
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
Temperature
Max. 105°C (221°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
10/2/08 W