AZ2270
30 AMP MINIATURE
POWER RELAY
FEATURES
• Quick-connect leads for contacts
• 1 Form A, B and C contacts available
• AC and DC coils available
• High dielectric strength version available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• TÜV pending
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res.
CONTACTS
Arrangement SPST (1 Form A, or B)
Operate Time
Release Time
15 msec max. at nominal coil voltage
SPDT (1 Form C)
10 msec max. at nominal coil voltage
(without suppression)
Ratings Resistive load:
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A (Form A)
15 A (Form B)
Dielectric Strength
(at sea level for 1 min.)
1500 Vrms contact to contact
2500 Vrms contact to coil
4000 Vrms contact to coil (“T” version)
Max. switched voltage: 277 VAC, 28 VDC
UL, CUR 1 Form A
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC
30 A at 277 VAC, General Use [1][2]
2 Hp at 250 VAC [1][2]
50% RH
1 HP at 125 VAC [1][2]
30 A at 28 VDC [1]
20/60 (FLA/LRA) at 277 VAC 30k cycles [1]
Dropout
DC:> 10%of nominal coil voltage
AC: > 20%of nominal coil voltage
Ambient Temperature
Operating
1 Form B
15 A at 277 VAC, General Use [1]
10 A at 28 VDC [1]
-55°C (-67°F) to 85°C (185°F)
-55°C (-67°F) to 155°C (311°F)
Storage
0.5 HP at 250 VAC [1]
0.25 HP at 125 VAC [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles [1]
Vibration
Shock
0.062" DA at 10–55 Hz
10 g
Enclosure
Terminals
P.B.T. polyester
1 Form C
30/20 A (N.O./N.C.) at 277 VAC, General Use [1][2]
20/10 A (N.O./N.C.) at 28 VDC[1]
2/0.5 HP (N.O./N.C.) at 250 VAC[1][2]
1/0.25 HP (N.O./N.C.) at 125 VAC[1][2]
20/60 (FLA/LRA) at 277 VAC 30k cycles N.O. [1]
10/33 (FLA/LRA) at 277 VAC 30k cycles N.C. [1]
Tinned copper alloy, P.C., Quick Connects
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
270°C (518°F)
5 seconds
Material
Silver cadmium oxide [1], silver tin oxide [2]
Resistance < 50 milliohms initially
(24 V, 1 A voltage drop method)
80°C (176°F)
Max. Immersion Time 30 seconds
Weight
36 grams
COIL
Power
NOTES
At Pickup Voltage
(typical)
DC: 500 mW
AC: 1.4 VA
1. All values at 20°C (68°F).
Max. Continuous
Dissipation
DC: 1.7 W at 20°C
AC: 2.7 VA at 20°C
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Max. Temperature
155°C (311°F)
9/26/06W