AZ2250
30 AMP MINIATURE
POWER RELAY
FEATURES
• 1 Form A, B and C contacts available
• AC and DC coils available
• High dielectric strength version available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40027037
CONTACTS
GENERAL DATA
Arrangement SPST (1 Form A)
SPST (1 Form B)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 250 VAC
SPDT (1 Form C)
Ratings
1 Form A
Resistive load:
Operate Time
Release Time
15 ms max. at nominal coil voltage
10 ms max. at nominal coil voltage
(with no coil suppression)
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.)
4000 Vrms coil to contact (version “T”)
1500 Vrms between open contacts
1 Form B
1 Form C
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
Insulation Resistance
Dropout
1000 megaohms min. at 20°C,
500 VDC 50% RH
Max. switched power: 560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
Max. switched current: 30 A (N.O.)
20 A (N.C.)
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Ambient Temperature
Operating
Max. switched voltage: 28 VDC or 277 VAC
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
Material
Silver cadmium oxide [1], silver tin oxide [2]
Vibration
1.5 mm DA at 10-55 Hz
10 g
Resistance
< 50 milliohm initially
(24 V, 1A voltage drop method)
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
COIL
Power
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
At Pickup Voltage
(typical)
500 mW, DC coil
1.4 VA, AC coil
5 seconds
80°C (176°F)
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
30 seconds
36 grams
Temperature Rise
Max. Temperature
43°C (77°F) at nominal coil voltage
155°C (311°F)
Packing unit in pcs
40 per plastic tray / 280 per carton
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. AC coils are not VDE approved
4. 18 VDC coil is not VDE approved.
5. Specification subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08