5秒后页面跳转
ATxmega128B1 PDF预览

ATxmega128B1

更新时间: 2023-12-06 20:10:08
品牌 Logo 应用领域
美国微芯 - MICROCHIP /
页数 文件大小 规格书
145页 6800K
描述
Low-power, high-performance 8/16-bit AVR? microcontroller featuring 128 KB self-programming Flash

ATxmega128B1 数据手册

 浏览型号ATxmega128B1的Datasheet PDF文件第3页浏览型号ATxmega128B1的Datasheet PDF文件第4页浏览型号ATxmega128B1的Datasheet PDF文件第5页浏览型号ATxmega128B1的Datasheet PDF文件第7页浏览型号ATxmega128B1的Datasheet PDF文件第8页浏览型号ATxmega128B1的Datasheet PDF文件第9页 
3.  
Overview  
The Atmel® AVR® XMEGA® is a family of low power, high performance, and peripheral rich 8/16-bit microcontrollers  
based on the AVR enhanced RISC architecture. By executing instructions in a single clock cycle, the Atmel AVR XMEGA  
devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the  
system designer to optimize power consumption versus processing speed.  
The AVR CPU combines a rich instruction set with 32 general purpose working registers. All 32 registers are directly  
connected to the arithmetic logic unit (ALU), allowing two independent registers to be accessed in a single instruction,  
executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs many times  
faster than conventional single-accumulator or CISC based microcontrollers.  
The Atmel AVR XMEGA B1 devices provide the following features: in-system programmable flash with read-while-write  
capabilities; internal EEPROM and SRAM; two-channel DMA controller, four-channel event system and programmable  
multilevel interrupt controller, 53 general purpose I/O lines, real-time counter (RTC); Liquid Crystal Display supporting up  
to 4x40 segment driver, ASCII character mapping and built-in contrast control (LCD); three flexible, 16-bit timer/counters  
with compare and PWM channels; two USARTs; one two-wire serial interface (TWI); one full speed USB 2.0 interface;  
one serial peripheral interface (SPI); AES and DES cryptographic engine; two 8-channel, 12-bit ADCs with  
programmable gain; four analog comparators (ACs) with window mode; programmable watchdog timer with separate  
internal oscillator; accurate internal oscillators with PLL and prescaler; and programmable brown-out detection.  
The program and debug interface (PDI), a fast, two-pin interface for programming and debugging, is available. The  
devices also have an IEEE std. 1149.1 compliant JTAG interface, and this can also be used for on-chip debug and  
programming.  
The ATx devices have five software selectable power saving modes. The idle mode stops the CPU while allowing the  
SRAM, DMA controller, event system, interrupt controller, and all peripherals to continue functioning. The power-down  
mode saves the SRAM and register contents, but stops the oscillators, disabling all other functions until the next TWI,  
USB resume, or pin-change interrupt, or reset. In power-save mode, the asynchronous real-time counter continues to  
run, allowing the application to maintain a timer base while the rest of the device is sleeping. In power-save mode, the  
LCD controller is allowed to refresh data to the panel. In standby mode, the external crystal oscillator keeps running while  
the rest of the device is sleeping. This allows very fast startup from the external crystal, combined with low power  
consumption. In extended standby mode, both the main oscillator and the asynchronous timer continue to run, and the  
LCD controller is allowed to refresh data to the panel. To further reduce power consumption, the peripheral clock to each  
individual peripheral can optionally be stopped in active mode and idle sleep mode.  
Atmel offers a free QTouch® library for embedding capacitive touch buttons, sliders and wheels functionality into AVR  
microcontrollers.  
The devices are manufactured using Atmel high-density, nonvolatile memory technology. The program flash memory can  
be reprogrammed in-system through the PDI or JTAG interfaces. A boot loader running in the device can use any  
interface to download the application program to the flash memory. The boot loader software in the boot flash section will  
continue to run while the application flash section is updated, providing true read-while-write operation. By combining an  
8/16-bit RISC CPU with in-system, self-programmable flash, the Atmel XMEGA B1 is a powerful microcontroller family  
that provides a highly flexible and cost effective solution for many embedded applications.  
The atmel AVR ATx devices are supported with a full suite of program and system development tools, including C  
compilers, macro assemblers, program debugger/simulators, programmers, and evaluation kits.  
XMEGA B1 [DATASHEET]  
Atmel-8330H-AVR-ATxmega64B1-128B1_datasheet–AVR–12/2014  
6

与ATxmega128B1相关器件

型号 品牌 描述 获取价格 数据表
ATXMEGA128B1_14 ATMEL 8/16-bit Atmel XMEGA B1 Microcontroller

获取价格

ATXMEGA128B1-AU ATMEL 8/16-bit Atmel XMEGA B1 Microcontroller

获取价格

ATXMEGA128B1-AUR MICROCHIP IC MCU 8BIT 128KB FLASH 100TQFP

获取价格

ATXMEGA128B1-CUR MICROCHIP IC MCU 8BIT 128KB FLASH 100CBGA

获取价格

ATXMEGA128B3 ATMEL 8/16-bit Atmel XMEGA B3 Microcontroller

获取价格

ATxmega128B3 MICROCHIP Low-power, high-performance 8/16-bit AVR? microcontroller featuring 128KB self-programming

获取价格