● Fully integrated PLL with low phase noise VCO, PLL loop filter and full support of multi-channel operation with arbitrary
channel distance due to fractional-N synthesizer
● Sophisticated threshold control and quasi-peak detector circuit in the data slicer
● 433.92MHz, and 315MHz without external VCO and PLL components
● Efficient XTO start-up circuit (> –1.5k worst case start impedance)
● Changing of modulation type ASK/FSK and data rate without component changes to allow different modulation schemes in
TPM and RKE
● Minimal external circuitry requirements for complete system solution
● Adjustable output power: 0 to 10dBm adjusted and stabilized with external resistor, programmable output power with 0.5dB
steps with internal resistor
● Clock and interrupt generation for microcontroller
● ESD protection at all pins (±2.5kV HBM, ±200V MM, ±500V FCDM)
● Supply voltage range: 2.15V to 3.6V or 4.4V to 5.25V
● Typical power-down current < 10nA
● Temperature range: –40°C to +105°C
● Small 7mm 7mm QFN48 package
Applications
● Automotive keyless entry and passive entry go (handsfree car access)
● Tire pressure monitoring systems
● Remote control systems
● Alarm and telemetering systems
● Energy metering
● Home automation
Benefits
● No SAW device needed in key fob designs to meet automotive specifications
● Low system cost due to very high system integration level
● Only one crystal needed in system
● Less demanding specification for the microcontroller due to handling of power-down mode, delivering of clock and
complete handling of receive/transmit protocol and polling
● Single-ended design with high isolation of PLL/VCO from PA and the power supply allows a loop antenna in the key fob to
surround the whole application
● Integration of tire pressure monitoring, passive entry and remote keyless entry
2
ATA5823/ATA5824 [DATASHEET]
4829G–RKE–01/15