5秒后页面跳转
AS1334-BTDT-15 PDF预览

AS1334-BTDT-15

更新时间: 2024-02-06 16:53:52
品牌 Logo 应用领域
艾迈斯 - AMSCO 转换器
页数 文件大小 规格书
17页 1733K
描述
650mA, Ultra low Ripple Step Down DC/DC Converter

AS1334-BTDT-15 技术参数

是否无铅: 不含铅生命周期:Active
Reach Compliance Code:unknown风险等级:5.74
Is Samacsys:NBase Number Matches:1

AS1334-BTDT-15 数据手册

 浏览型号AS1334-BTDT-15的Datasheet PDF文件第9页浏览型号AS1334-BTDT-15的Datasheet PDF文件第10页浏览型号AS1334-BTDT-15的Datasheet PDF文件第11页浏览型号AS1334-BTDT-15的Datasheet PDF文件第13页浏览型号AS1334-BTDT-15的Datasheet PDF文件第14页浏览型号AS1334-BTDT-15的Datasheet PDF文件第15页 
AS1334  
Datasheet - Detailed Description  
Internal Synchronous Rectifier  
To reduce the rectifier forward voltage drop and the associated power loss, the AS1334 uses an internal NFET as a  
synchronous rectifier. The big advantage of a synchronous rectification is the higher efficiency in a condition where the  
output voltage is low compared to the voltage drop across an ordinary rectifier diode. During the inductor current down  
slope in the second part of each cycle the synchronous rectifier is turned on. Before the next cycle the synchronous  
rectifier is turned off.  
There is no need for an external diode because the NFET is conducting through its intrinsic body diode during the  
transient intervals before it turns on.  
Power-OK  
The POK output indicates if the output voltage is within 90% of the nominal voltage level. As long as the output voltage  
is within regulation the open-drain POK output sinks current.  
Shutdown Mode  
If EN is set to high (>1.2V) the AS1334 is in normal operation mode. During power-up and when the power supply is  
less than 2.7V minimum operating voltage, the chip should be turned off by setting EN low. In shutdown mode the  
following blocks of the AS1334 are turned off, PFET switch, NFET synchronous rectifier, reference voltage source,  
control and bias circuitry. The AS1334 is designed for compact portable applications, such as mobile phones where the  
system controller controls operation mode for maximizing battery life and requirements for small package size  
outweigh the additional size required for inclusion of UVLO (Under Voltage Lock-Out) circuitry.  
Note: Setting the EN digital pin low (<0.5V) places the AS1334 in a 0.01µA (typ.) shutdown mode.  
Thermal Overload Protection  
To prevent the AS1334 from short-term misuse and overload conditions the chip includes a thermal overload  
protection. To block the normal operation mode the device is turning the PFET and the NFET off in PWM mode as  
soon as the junction temperature exceeds 150°C. To resume the normal operation the temperature has to drop below  
140°C.  
Note: Continuing operation in thermal overload conditions may damage the device and is considered bad practice.  
Current Limiting For Protection  
If in the PWM mode the cycle-by-cycle current limit of 1200mA (max.) is reached the current limit feature takes place  
and protects the device and the external components. A timed current limiting mode is working when a load pulls the  
output voltage down to approximately 0.375V. In this timed current limit mode the inductor current is forced to ramp  
down to a safe value. This is achived by turning off the internal PFET switch and delaying the start of the next cycle for  
3.5us. The synchronous rectifier is also turned off in the timed current limit mode.  
The advantage of the timed current limit mode is to prevent the device from the loss of the current control.  
www.austriamicrosystems.com  
Revision 1.04  
12 - 17  

与AS1334-BTDT-15相关器件

型号 品牌 描述 获取价格 数据表
AS1334-BTDT-18 AMSCO 650mA, Ultra low Ripple Step Down DC/DC Converter

获取价格

AS1334-BTDT-25 AMSCO 650mA, Ultra low Ripple Step Down DC/DC Converter

获取价格

AS1334-BTDT-30 AMSCO 650mA, Ultra low Ripple Step Down DC/DC Converter

获取价格

AS1334-BTDT-33 AMSCO 650mA, Ultra low Ripple Step Down DC/DC Converter

获取价格

AS1334-BTDT-XX AMSCO 650mA, Ultra low Ripple Step Down DC/DC Converter

获取价格

AS1335 AMSCO 1.5A, 1.5MHz, Synchronous DC/DC Step-Down Converter

获取价格