RS (ARS)
2. Specifications
Item
Specifications
Arrangement
Contact material
1 Form C
Contact
Rating
Gold plating
Contact resistance (Initial)
Nominal switching capacity
Contact carrying power
Max. switching voltage
Max. switching current
Max. 100 mΩ (By voltage drop 10 V AC 10mA)
1W (at 3 GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4), 10 mA 24 V DC (resistive load)
Max. 10W (at 3GHz, Impedance: 50/75Ω, V.S.W.R.: Max. 1.4)
30 V DC
0.5 A DC
200mW
200mW
400mW
Single side stable type
Nominal
operating
power
1 coil latching type
2 coil latching type
Max. 1.20/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.40/3GHz (Surface-mount terminal)
V.S.W.R.
High frequency
characteristics,
Impedance: 50Ω
(Initial)
Max. 0.10dB/900MHz, Max. 0.35dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.40dB/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Min. 60dB/900MHz, Min. 35dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Isolation
Max. 1.15/900MHz, Max. 1.40/3GHz (Standard PC board terminal)
Max. 1.20/900MHz, Max. 1.50/3GHz (Surface-mount terminal)
V.S.W.R.
High frequency
characteristics,
Impedance: 75Ω
(Initial)
Max. 0.10dB/900MHz, Max. 0.30dB/3GHz (Standard PC board terminal)
Max. 0.20dB/900MHz, Max. 0.50dB/3GHz (Surface-mount terminal)
Insertion loss (without D.U.T. board’s loss)
Min. 60dB/900MHz, Min. 30dB/3GHz (Standard PC board terminal)
Min. 55dB/900MHz, Min. 30dB/3GHz (Surface-mount terminal)
Isolation
Insulation resistance (Initial)
Min. 100MΩ (at 500V DC, Measurement at same location as “Breakdown voltage” section.)
500 Vrms for 1min. (Detection current: 10mA)
Between open contacts
Breakdown
voltage
(Initial)
Between contact and earth terminal
Between contact and coil
500 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Max. 60°C 140°F
Temperature rise (at 20°C 68°F)
Operate time (at 20°C 68°F)
(By resistive method, nominal voltage applied to the coil, contact carrying current: 10mA)
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Max. 6 ms (Nominal voltage applied to the coil, excluding contact bounce time)
(without diode)
Release time (at 20°C 68°F)
Set time and Reset time (at 20°C 68°F)
Functional
Shock
Max. 10 ms (Nominal voltage applied to the coil, excluding contact bounce time)
Min. 196 m/s2 (Half-wave pulse of sine wave: 11 ms, detection time: 10μs)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms)
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs)
10 to 55 Hz at double amplitude of 5 mm
Approx. 40dB
resistance
Destructive
Functional
Destructive
Mechanical
characteristics
Vibration
resistance
Standard type
Operation noise*
Expected life
Silent type (75Ω, PC board terminal type only)
Approx. 30dB
Min. 5×106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (at 180 cpm)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(10V DC 10mA resistive load)/Min. 3×105 (24V DC 10mA resistive load)
Min. 106 (Standard PC board terminal), Min. 3×105 (Surface-mount terminal)
(1W, at 3GHz, Impedance: 50Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Single side stable standard type
Mechanical
life
Single side stable silent type
Latching type
50Ω type
Electrical life
Min. 3×105 (10mA 24V DC resistive load)
75Ω type
Min. 3×105 (1W, at 3GHz, Impedance: 75Ω, V.S.W.R: Max. 1.4) (at 20 cpm)
Ambient temperature: –40 to 70°C –40°F to 158°F
(Single side stable standard and Latching type)
Ambient temperature: –40 to 60°C –40°F to 140°F (Single side stable silent type)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Conditions for operation, transport and storage
Approx. 2 g .071 oz
* Measured the operation noise of the relay alone (with diodes at both ends of the coil) 30cm away from top side, by the A-weighted, FAST method while applying the rated
voltage.
ASCTB106E 201407-T
–4–